Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Planet Networking & Communication HZS-532E-DE
- Page 1 Z-Wave Smart Energy Meter HZS-532E-DE/HZS-531A-US...
- Page 2 Z-Wave Smart Energy Meter HZS-530 Series Copyright Copyright © 2015 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
- Page 3 Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision User’s Manual of PLANET Z-Wave Smart Energy Meter Model: HZS-532E-DE / HZS-531A-US Rev: 1.00 (October, 2015) Part No. EM-HZS-530 Series_v1.0.doc...
-
Page 4: Table Of Contents
Z-Wave Smart Energy Meter HZS-530 Series Table of Contents Chapter 1. Product Introduction ..............5 1.1 Package Contents................5 1.2 Overview.....................5 1.3 Specifications..................7 Chapter 2. Hardware Interface................8 Chapter 3. Z-Wave Device Setting..............10 3.1 Configuring Z-Wave Device via Web ..........10 3.2 Configuring Z-Wave via Smart Phone..........13 3.3 Configuring Z-Wave via HTS-1000P.......... -
Page 5: Chapter 1. Product Introduction
Z-Wave Smart Energy Meter HZS-530 Series Chapter 1. Product Introduction 1.1 Package Contents The package should contain the following: Energy Meter x 1 Quick Installation Guide x 1 If any of the above items are missing, please contact your seller immediately. 1.2 Overview Home Automation and Smart Home Control The HZS (Z-Wave Sensing Device) series of PLANET Home Automation product family,... - Page 6 If the current exceeds 10 amps, the circuit breaker will open up, cutting off any more current flow. Furthermore, the HZS-532E-DE, an ETSI compliant product in the HZS-530 series, could inform you about the current load of the connected appliances by...
-
Page 7: Specifications
Z-Wave Smart Energy Meter HZS-530 Series 1.3 Specifications Product HZS-531A-US HZS-532E-DE Hardware and Network Z-Wave Frequency America: 908.42MHz Europe: 868.42MHz Power On/Off: red/green LED Indicators Z-Wave RF transfer/receive: red/green (flash) Energy level: green/orange/red 1 x Power On/Off button (Either control manually or remotely via... -
Page 8: Chapter 2. Hardware Interface
Z-Wave Smart Energy Meter HZS-530 Series Chapter 2. Hardware Interface Model HZS-531A-US Dimensions (W x D x H) 100 x 62 x 38 mm Weight 156g (gross weight) Interface Description AC outlet Connect a device to power outlet to supply power to it. 1) Press to include or exclude a Z-Wave network. - Page 9 Z-Wave Smart Energy Meter HZS-530 Series Model HZS-532E-DE Dimensions (Φ x L) 61 x 58 mm Weight 126g (gross weight) Interface Description Power On/Off: Red/Green Z-Wave RF transfer/receive: Red/Green (Flash) Energy level: Green/Orange/Red Color Current Green 0 ~ 3 AMP...
-
Page 10: Chapter 3. Z-Wave Device Setting
Z-Wave Smart Energy Meter HZS-530 Series Chapter 3. Z-Wave Device Setting 3.1 Configuring Z-Wave Device via Web Please refer to the following steps to add Z-Wave device via web. Step 1. Include a Z-Wave device via web. a) Go to "Z-Wave" and click "Device Configuration". - Page 11 Z-Wave Smart Energy Meter HZS-530 Series Set up the location and room for Z-Wave device via web. Step 2. a. Create rooms in your environment. b. Edit device. Create a scene via web. Step 3. a. Click “Create Scene” and name new scene. b.
- Page 12 Z-Wave Smart Energy Meter HZS-530 Series c. Select ON or OFF from this scene. d. You can click “RUN” to run this scene. Create trigger via web Step 4. a. Click “Create a Trigger” and name new trigger. b. Select a Z-Wave device for this trigger.
-
Page 13: Configuring Z-Wave Via Smart Phone
Z-Wave Smart Energy Meter HZS-530 Series After entering the time selected for the scene to trigger, tick “Save and send alarm notification”. Tick “Active” to enable this trigger. 3.2 Configuring Z-Wave via Smart Phone The HAC-1100 can be used on iOS and Android operating system. Cloud Home can be downloaded at Google Play store or app store. - Page 14 Z-Wave Smart Energy Meter HZS-530 Series c. Inclusion/Exclusion d. Click Inclusion to add device. e. e. Press the program switch button 3 times within 2 seconds on the Z-Wave device to connect.
- Page 15 Z-Wave Smart Energy Meter HZS-530 Series Set up the location and room for Z-Wave device. Step 2. b. Click “No Room” and will show the a. Create rooms in your environment. device. And place the new devices in a room. c.
- Page 16 Z-Wave Smart Energy Meter HZS-530 Series Done successfully. e. Click “Back” to save.
- Page 17 Z-Wave Smart Energy Meter HZS-530 Series Create a scene via smart phone. Step 3. a. Click “Add” and name a new scene. b. Click “Add” to add a Z-Wave device. c. Select a Z-Wave device. d. Click ON or OFF for the device you select.
- Page 18 Z-Wave Smart Energy Meter HZS-530 Series Create Trigger via smart phone. Step 4. b. Name this new Trigger. a. Click “Add”. d. Select a mode for a Z-Wave device. c. Select the Z-Wave device and click e. Select a scene. next.
-
Page 19: Configuring Z-Wave Via Hts-1000P
Z-Wave Smart Energy Meter HZS-530 Series 3.3 Configuring Z-Wave via HTS-1000P Step 1. Fill out the IP of control gateway to connect with gateway. Click “Gateway” button. Click magnifying glass to search the IP of gateway. Control pad found an IP of gateway. - Page 20 Z-Wave Smart Energy Meter HZS-530 Series The default gateway port is 5000, and user name and password are both admin. Include a Z-Wave device via HTS-1000P. Step 2. Click “Z-Wave devices” button to add Z-Wave devices gateway. Click the “Include New Device”...
- Page 21 Z-Wave Smart Energy Meter HZS-530 Series When message “Waiting user action”, you can press the match button on Z-Wave devices. Press program switch button 3 times within 2 seconds on the Z-Wave device connect. If a device is added successfully, it will show message: “Command completed...
- Page 22 Z-Wave Smart Energy Meter HZS-530 Series When message “Waiting user action”, you can press the match button on Z-Wave devices to exclude device. After including Z-Wave devices in gateway, you can create different scenes with this Step 3. function. You can set scenes to control your devices in Scene mode. Click the “Scene”...
- Page 23 Z-Wave Smart Energy Meter HZS-530 Series Select one device. Click the “Plus” button to add device. Select status device (ON or OFF). Click “All Scenes” to check the scene.
- Page 24 Z-Wave Smart Energy Meter HZS-530 Series Step 4 In the Trigger mode, the trigger time is set. An alarm notification is sent via sensor. If a sensor is not installed, this step can be skipped. Click “Trigger” button. Click “Create Trigger”. Trigger: Name this...
- Page 25 Z-Wave Smart Energy Meter HZS-530 Series Step 5 After configuring this part, you can control Z-Wave devices and scenes via control pad. Click the “Control Panel” button. Click three-line button on the upper right corner and click “Add Panel”. There are two types of panel that choose from.
- Page 26 Z-Wave Smart Energy Meter HZS-530 Series Click hold seconds to select the device or scene. Click on the device field. Select a device. Go back to the main page click “Control” button.
- Page 27 Z-Wave Smart Energy Meter HZS-530 Series You can control scenes and devices here.
-
Page 28: Appendix A: Troubleshooting & Frequently Asked Questions
Z-Wave Smart Energy Meter HZS-530 Series Appendix A: Troubleshooting & Frequently Asked Questions Features The frequency is different between Z-Wave and ZigBee. ZigBee is 2.4GHz and Z-Wave is about 900MHz. This difference between Z-Wave and ZigBee The outdoor distance is different. ZigBee is 10~75 meters and Z-Wave is about 30 meters.