Table of Contents
Advertisement
Note for connecting armoured cable:
It is necessary to check back with the Adolf Schuch GmbH before installing other
!
explosion-proof cable glands or explosion-proof locking screws than the ones supplied!
4.3 How to close the light fitting
Join diffuser with included reflector and housing together.
Hook the clamp lockings into the diffuser and fix it.
After closing the light fitting take care that the whole gasket is effective.
4.4 Connecting an emergency battery
In its delivery state, there is no electrical connection between the emergency battery and the
emergency light unit.
If no power supply is present, even if the light fitting is connected to the emergency
!
battery, it will not enter emergency lighting mode!
The electrical connection between the emergency battery and emergency light unit should be
established as follows:
Open the battery box by loosening the locking screws and flip open the lid.
Remove the protective cap from the connector of the battery cable.
Attach the connector of the battery cable to the socket in the battery box. Check the catch
mechanism of the plug connection.
Close the lid of the battery box and tighten the locking screws.
10
L-01412-4-04
Advertisement
Table of Contents
