Installation - Toshiba TWD-BM105GF4 Series Owner's Manual

SAFETY INSTRUCTIONS

INSTALLATION

• Remove all packaging material and transport bolts before
using the appliance. Otherwise, serious damage may result.
• This appliance is equipped with a single inlet valve and can
be connected to the cold water supply only.
• Mains plug must be accessible after installation.
• Before washing clothes for the first time, the product shall be
operated once throughout all the procedures without any
clothes inside.
• Before using the washer dryer, the product shall be calibrated.
• Do not put any excessively heavy objects on the appliance, like
water containers or heating devices.
• The new hose-sets supplied with the appliance are to be used
and that old hose-sets should not be reused.
• Max. Inlet water pressure 1 Mpa.
Min. inlet water pressure 0.05 MPa.
ELECTRICAL CONNECTION
• Make sure the supply cable is not trapped by the machine, it can get
damaged.
• Connect the product to a grounded outlet protected by a fuse
complying with the values in the " Technical specifications" table.
The grounding installation has to be made by a qualified electrician.
Ensure that the machine is installed in accordance with the local
regulations.
• Water and electrical connections must be carried out by a qualified
technician in accordance with the manufacturer's instructions and
local safety regulations.
•
Don´t use multiple plugs or extension cords.
• The appliance must not have an external switching device such as a
timer or connected to a circuit that is regularly switched on and off.
• Do not pull the plug out of the mains outlet if there is flammable
gas around.
• Never pull out power plug with wet hands.
• Always pull at the plug, not at the cable.
• Always unplug the appliance if it is not being used.
6