Toshiba TWD-BM105GF4 Series Owner's Manual page 16

INSTALLATION
Connect the other end of water inlet hose to the inlet valve at the backside of
product and fasten the hose tightly clockwise.
water Inlet valve
Drain Hose
Warning!
• Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result of water leakage.
There are two ways to place the end of drain hose:
1.Put it into the drain port.If the drain hose is put
into the drain hole on the floor, fix the drain hose
on the back of the appliance to prevent water
overflow from the drum.
Do not unscrew
the screw
Note!
• If the machine has
Warning!
• When installing drain hose, fix it properly with a rope.
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
water inlet hose
Drain port
Drain port
drain hose support, please install it like the following .
2.Connect it to the branch
drainhose of the trough.
Trough
Max.100cm
Min.60cm
15
Hose Retainer