Appendix A: Adjustable Mattress Base Assembly Supplement - Urban Barn WESSEX Assembly Instructions Manual

ADJUSTABLE MATTRESS BASE ASSEMBLY SUPPLEMENT
AN ADJUSTABLE MATTRESS BASE IS A FREESTANDING MATTRESS SUPPORT THAT SITS WITHIN
THE PERIMETER OF THE BED FRAME.
IF USING THIS BED FRAME WITH A STANDARD BOX SPRING OR FOUNDATION THESE INSTRUCTIONS DO NOT APPLY.
PRE-ASSEMBLED SIDE RAIL CLEATS OBSTRUCT ADJUSTABLE BASE INSTALLATION AND OPERATION.
FOLLOW THESE INSTRUCTIONS TO REMOVE THEM.
THE FOLLOWING PARTS ARE NOT REQUIRED FOR ADJUSTABLE MATTRESS BASE INSTALLATION:
D. BED SLAT
E. LEG SUPPORT
STEP 1:
USE ALLEN KEY (3) TO UNSCREW ALLEN BOLTS
AND REMOVE PRE-ASSEMBLED SIDE RAIL CLEATS.
NOTE: YOU MAY WISH TO RETAIN UNUSED PARTS IF IN THE FUTURE YOU INTEND TO USE THE BED FRAME WITH
A STANDARD BOX SPRING OR FOUNDATION.
WESSEX BED
APPENDIX A:
3 PCS 1. ALLEN BOLT (6X40mm)
3 PCS 2. WOOD SCREW (8X30mm)
3
X20
4 PCS
7 PCS