Adjusting The Display Contrast; Entering Titles - Clarion DXZ555MP Owner's Manual

Operations Common to Each Mode
G Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗ The factory default setting is "5".
2-1. Select "CONTRAST".
3-1. Turn the [ROTARY] knob to select from 1-8.
To change other settings
1. Press the [ADJ] button to switch to the
adjustment selection display.
2. Press the [a, d] lever upward or
downward to select the "item name".
Each time the [a, d] lever is pressed up/
down, the item display changes in the
following order:
"BLINK LED" ↔ "AMP CANCEL" ↔ "AUX
SENSE" ↔ "SYS CHK"
3. Turn the [ROTARY] knob to select the
"desired setting item".
∗ After completing settings, press the [ADJ]
button to return to the previous mode.
G Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
∗ The factory default setting is "OFF".
2-1. Select "BLINK LED".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
G Setting the external amplifier
∗ The factory default setting is "OFF".
2-1. Select "AMP CANCEL".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
G Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
∗ The factory default setting is "AUX MID".
2-1. Select "AUX SENSE".
3-1. Turn the [ROTARY] knob to select "AUX
LOW", "AUX MID" or "AUX HIGH".
G Performing a system check
This function allows you to perform a system
check from the adjust mode when required.
2-1. Select "SYS CHK <E>".
3-1. Press and hold the [
second or longer.
"SYSTEM CHK" appears in the display,
then the unit returns to the previous
operation mode.

Entering titles

Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer and
TV stations. The number of titles that can be
entered for each mode are as follows.
Mode
CD mode
TV mode
Tuner mode
CD changer mode
DCZ625 connected
CDC655Tz connected
1. Press the [SRC] button to select the mode
you want to enter a title (TUNER, CD, CD
changer or TV).
2. Select and play a CD in the CD changer or
tune in to a TV station or TUNER for which
you want to enter the title.
3. Press the [D] button and display the title
display.
4. Press and hold the [T] button for 1 second or
longer.
The display switches to the title input display.
5. Press the [a, d] lever upward or downward
to move the cursor.
6. Press the [BND] button to select a character.
Each time you press the [BND] button, the
character changes in the following order:
Capital letters ➜ Numbers ➜ Symbols ➜
Capital letters...
7. Turn the [ROTARY] knob to select the
desired character.
8. Repeat steps 5 to 7 to enter up to 10
characters for the title.
9. Press and hold the [
seconds or longer to store the title into
memory and cancel title input mode.
] button for 1
Number of titles
50 titles
20 titles
30 titles
Number of titles
100 titles
100 titles
] button for 2
21
DXZ555MP