Rail Installation And Capacity Guide - Cambro COMBO CART PLUS Owner's Manual

III. rail Installation and Capacity Guide (continued)
TIPs: It is easier to start rail installation from the bottom and move up.
1. Using the chart on page 2, select the type of holding you would like to achieve. Follow the
number guides etched into the columns of the cart to place your sheet pan, food pan, tray or
pizza box in the correct position. For example, to achieve standard capacity for full-sized sheet
pans, place the rails at positions 1, 3, 5, 7, 9, 11 and 13.
2. Insert the top tabs into the front and corresponding middle and rear slots of the column.
3. Slide the rails towards the back of the cart then rotate it down into a nested position.
4. Install the subsequent rails into position following the appropriate numbering guide. Once the
rails have been installed on one side of the cart, repeat instructions to configure the other side.
13" x 18" (45,7 x 66 cm)
Half size sheet Pans
(Trays fit 2 deep)
sTanDarD
14 / compartment 32 / compartment
14 / Low Cart
28 / Tall Cart
40 x 60 cm (20 ⁄ " x 23
1 1
2
(Lip load)
sTanDarD
7 / compartment 15 / compartment
7 / Low Cart
14 / Tall Cart
MaXIMuM sTanDarD
10 / compartment
32 / Low Cart 10 / Low Cart
64 / Tall Cart 20 / Tall Cart
⁄ ") Trays
2
MaXIMuM sTanDarD
14 / compartment
15 / Low Cart 14 / Low Cart
30 / Tall Cart 28 / Tall Cart
2 ⁄ " (6,5 cm) Deep
1
2
Full size Food Pans
MaXIMuM
16 / compartment
16 / Low Cart
32 / Tall Cart
32 x 53 cm (12" x 20") Trays
(Trays fit 2 deep)
MaXIMuM
32 / compartment
32 / Low Cart
64 / Tall Cart
18" x 26" (45,7 x 66 cm)
Full size sheet Pans
sTanDarD MaXIMuM
7 / compartment 16 / compartment
7 / Low Cart 16 / Low Cart
14 / Tall Cart 32 / Tall Cart
4" (10 cm) Deep
Full size Food Pans
(Pans fit 2 deep)
sTanDarD and MaXIMuM
10 / compartment
10 / Low Cart
20 / Tall Cart
large Pizza Boxes
16" x 16" x 2" (40,6 x 40,6 x 5,1 cm)
sTanDarD MaXIMuM
7 / compartment 8 / compartment
7 / Low Cart 8 / Low Cart
14 / Tall Cart 16 / Tall Cart
3