Mitsubishi FR-BIF-H Series Quick Start Manual

TRANSISTORIZED
INVERTER
Radio noise filter
< FR-BIF(-H) >
Thank you for choosing the Mitsubishi transistorized inverter option unit.
This instruction manual gives handling information and precautions for use of this equipment. Incorrect handling may
cause an unexpected fault. Before using the equipment, please read this manual carefully to use the equipment to
its optimum.
Please forward this manual to the end user.
As the capacitor is charged with high voltage for some time after power-off, it is dangerous to touch.
Any person who is involved in wiring or inspection of this equipment should be fully competent to do the work.
Do not subject the cables to scratches, excessive stress, heavy loads or pinching. Otherwise, you may get an
electric shock.
Apply only the voltage specified in the instruction manual to each cable of this option. Otherwise damage etc.
may occur.
Ensure that the cables are connected to the correct terminals. Otherwise failure may occur.
While power is on or for some time after power-off, do not touch the inverter and this option as they will be
extremely hot. Doing so can cause burns.
Do not drop this option, or subject it to impact
Do not connect the radio noise filter to the inverter output side.
When mounting this option, leave clearance from other equipment and enclosure walls to release heat.
Mount this option on a nonflammable wall without any holes.
Mounting it to or near flammable material may cause a fire.
This option has a limited life span. It is recommended to exchange this option when exchanging the inverter.
A radio noise filter is used to suppress radio noise emitted from the inverter power supply side.
1. Model
•
FR-BIF . . . . . . . . . . . . . . For the 200V class inverter
•
FR-BIF-H . . . . . . . . . . . . For the 400V class inverter
2. Specification
1) Capacity
2) Voltage
3) Mass
4) Heat generated
5) Improvement effect
6) Surrounding air temperature -10°C to 50°C
Safety Precautions
Can be used for any inverter capacity.
200/200/220V 50/60/60Hz(400/400/440V 50/60/60Hz)
0.1kg
4W or less
Greater effect at 10MHz or less.
Note that its effect differs according to regions (intensity of radio wave).