JLab GO TALK Manual page 2

CONTROLS
LIGHT INDICATOR
SWITCH VOLUME/
GAIN CONTROL:
Press Hold
(Light indicator
will change)
MUTE ON/OFF:
Quick Press
IN USE
Incorrect
position
TIPS / TROUBLESHOOTING
• The GO Talk works with almost any recording software installed on macOS, Windows, or Linux. Review in your software's setting and
adjust accordingly.
• No additional drivers/software are needed for the GO Talk. Simply plug in and setup in device settings.
• GO Talk will not work through most tablets or mobile phones due to their power limitations. The output power source needs to produce
5v or greater to operate.
• GO Talk will not work through a power bank/battery pack. It will only work with USB-A input with an operating system.
• If you are connecting through a USB hub or 3rd party adapter, make sure the product has the correct power output support and
connection support.
• Using external speakers for playback can cause microphone reverberation and echo. It is recommended to use headphones/earbuds for
recording playback if this occurs.
Shop products
JLab Store + Burn-in Tool
VOLUME
VOLUME/GAIN WHEEL
Maximum Setting:
Light Blinks 3x
Minimum Setting:
Light Blinks 1x
RECORDING SETTING
Correct
position
| Product alerts | Burn-in your headphones
GAIN MUTE
HEADPHONE
AUX
USB-C
POWER
INPUT
CARDIOID
Record front
OMNI
Record all surroundings