Advertisement
SETUP
Connect USB-C to Talk microphone.
Connect to your PC or Mac USB INPUT.
Enter your PC or Mac settings to make sure connection is established.
SETUP TALK with PC / MAC
SETUP TALK WITH PC (WINDOWS 7, 8, or 10)
1. From the Start menu, select the Control Panel.
2. From the Control Panel, select the Sound icon.
3. Select the Recording tab and select "JLab Talk".
4. Select the Playback tab and select "JLab Talk".
SETUP TALK WITH MAC (macOS 10.10 or HIGHER)
1. Open System Preferences and select the Sound icon.
2. Select the Input tab and select "JLab Talk".
3. Select Output tab and select "JLab Talk".
4. From this screen, set the Output volume to desired level.
CONTROLS
BOTTOM
IN USE
- The Talk works with almost any recording software installed on macOS, Windows, or Linux. Review in your software's setting and adjust accordingly.
- No additional drivers/software are needed for the Talk. Simply plug in and setup in device settings.
- Talk will not work through a power bank/battery pack. It will only work with USB-A input with an operating system.
Shop products | Product alerts | Burn-in your headphones
JLab Store + Burn-in Tool
YOUR WARRANTY
All warranty claims are subject to JLab authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlab.com or visit jlab.com/contact
REGISTER TODAYjlab.com/register
VideosJLAB TALK MIC REVIEW VIDEO | SOUND TEST
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Talk that isn't answered in the manual? Leave your question here.