Advertisement
1
Place Mella on a flat, level surface, like a
countertop or tabletop and plug in the power supply.
3
Twist off cap from the side tank, fill with water, and
secure the cap back on the tank.
5
Follow the manufacturer's instructions for
preparation, then set fruiting blocks inside
chamber.
HOW TO USE IT
2
Slide the water tray into the unit through the
opening on the left-side wall.
4
Open the chamber door, slide the fan bracket up,
and place one (1) humidity filter inside the water tray.
Lower the fan bracket over the filter.
Make sure the
filter sits all the
way down into
the water tray with
felt facing forward.
6
Use the back side of this quick start guide to help
set the right environmental conditions.
7
Advertisement
