B R I D G E
Safety & Warnings
Read these instructions and keep them available for future reference.
•
This manual can be downloaded from:
https://adamsonsystems.com/en/support/downloads-directory
Heed all warnings and follow all instructions.
•
Clean this product with a dry cloth only.
•
Never restrict the ventilation ports.
•
Protect the cabling from being walked on or pinched.
•
Onlyuseattachmentsand/oraccessoriesspecifiedbyAdamsonSystemsEngineering.
•
A qualified technician must be present during the installation and use of this product.
Adamson Systems Engineering will not be liable for damages caused by any possible
misuse of this product.
•
Inspect the product before each use. If any sign of defect or damage is detected, imme-
diately withdraw the product from use for maintenance.
•
Referallservicingofthisproducttoqualifiedservicepersonnel.
This product contains potentially dangerous voltages.
•
Do not open the unit. There are no user serviceable parts inside this product. Failure to
comply voids warranty.
•
Do not use this product with a power cable that does not have a polarized, grounded plug.
This product must be grounded/earthed.
•
Do not install this product in wet or humid locations.
•
Unplug this product from the power source during lightning storms.
•
Be sure to use caution while moving this product to avoid injury.
This product can get hot when in use for extended periods of time.
•
To reduce the risk of overheating the product, avoid exposing it to direct sunlight.
•
Do not install this product near heat sources such as radiators, heat registers, stoves, or
other apparatus that produce heat.
Bridge - User Manual
Lorem ipsum
4