SAFETY NOTICE NOMENCLATURE OF PARTS TECHNICAL DATA CERTIFICATIONS AND MARKINGS INSTRUCTIONS FOR USE AND CARE CLEANING AND DISINFECTION SERVICING AND MAINTENANCE STORAGE AND TRANSPORT SERVICE LIFE AND DISCARD WARRANTY...
Page 4
FIRE 05 Thank you for choosing a PAB Akrapović product. PAB Fire 05 helmet is a safety helmet for the head intended for firefighting in buildings and other structures, as for other typical tasks and interventions of fire brigades. The PAB Fire 05 is in conformity with Regulation (EU) 2016/425, with reference to harmonised standard EN 443:2008.
The helmet is not to be used if the operability test is unsuccessful, if the helmet is damaged, if proper servicing or maintenance has not been made, or if PAB Akrapović original spare parts have not been used.
The user’s attention is also drawn to the danger of modifying or removing any of the original component parts of the helmet, other than as recommended by PAB Akrapović. Helmets should not be adapted for fitting attachments in a way not recommended by PAB Akrapović.
Page 7
⑥ Headband with ratchet knob for size adjustment ⑨ Neck protector (ALU) ⑩ Holland type neck protector...
52–64 Size range (head circumference in cm) See manufacturer’s information PA 6.6 Shell material – Polyamide 6.6 PAB FIRE 05 Model identification 2021 Year of manufacture 1 2 3 4 5 6 7 8 9 10 11 12 Month of manufacture Manufacturer’s trademark...
Page 9
ACCESSORIES MARKINGS Visor PAB FIRE 05 CLEAR CE conformity marking 0497 Notified body number European standard for Personal eye-equipment – High performance visors EN 14458:2018 intended only for use with protective helmets Manufacturer’s trademark PAB Akrapović d.o.o. Name of the manufacturer...
Page 10
Visor PAB FIRE 05 GOLD CE conformity marking 0497 Notified body number European standard for Personal eye-equipment – High performance visors EN 14458:2018 intended only for use with protective helmets Manufacturer’s trademark PAB Akrapović d.o.o. Name of the manufacturer Most 26, 52420 Buzet,...
Page 11
FIRE 05 Eye guard GOGGLES 05 (EN 14458:2018 marking) CE conformity marking 0497 Notified body number European standard for Personal eye-equipment – High performance visors EN 14458:2018 intended only for use with protective helmets Manufacturer’s trademark PAB Akrapović d.o.o. Name of the manufacturer...
USING THE ACCESSORIES Adjusting the visor PAB Fire 05 The helmet is equipped with a face guard (2) PAB FIRE 05 (available in versions CLEAR or GOLD) that meets the requirements of European standard EN 14458:2018 and is intended to protect the wearer’s eyes and face from flying particles, dust, and splashes of liquids.
Page 13
The visor PAB FIRE 05 has been tested for resistance to the following liquid chemicals: Sulphuric acid, Sodium hydroxide, p-Xylene, Butan-1-ol, n-Heptane. The eye guard Goggles 05 is intended for use with firefighting helmet model PAB FIRE 05. The eye guard can be used against various hazards as encountered in industry or during rescue activities which are likely to damage the eye.
Do not apply hydrocarbon-based cleaning products, solvents, paint, or stickers to the helmet or visors to prevent damage to the materials of the helmet, except in accordance with instructions given from PAB Akrapović. SHELL AND PLASTIC COMPONENTS: use soapy water and a soft cloth. Do not use detergents, solvent-based products, or abrasive materials.
Store the helmet in a closed cabinet to prevent extended exposure to cold, heat, humidity, light, fumes…To extend the lifetime of the helmet to the maximum clean it after each use and before storing. Before transport put the visor and the goggles in standby position and place the helmet in its PAB protective textile bag.
PAB Akrapović, or not used in accordance with the user manual. The PAB Akrapović product warranty does not cover and does not make any warranty for any defect, failure, deficiency, or error that is: •...
Need help?
Do you have a question about the FIRE 05 and is the answer not in the manual?
Questions and answers