Advertisement
Available languages
Available languages
Model
Indicator
Indicator Status
Network
indicator
TX:CP7602
Network
indicator
RX:CP3602
Frequency
HRP2: 59.40---61.56Ghz;
16QAM
Modulation mode
Wireless standard
WirelessHD1.1
Frequency Stability
±10PPM
Bandwidth
1.76GHZ/HPR
Transmission power
28dbm(MAX)
Antenna gain
18dbi(MAX)
Antenna Angle
-80°~80°
Receiving sensitivity
-72dbm
Audio and Video interface
HDMI
09
Working Status
No power on or in stand-
OFF
by status
Flash slowly
TX and RX are unconnected.
Flash rapidly
TX and RX are conneccted.
AV is normally transmitted
ON
No power on or in stand-
OFF
by status
Flash slowly
TX and RX are unconnected.
Flash rapidly
TX and RX are conneccted.
AV is received and output
ON
normally
CP7602/CP3602
HRP3: 61.56---63.72Ghz
2D: 480i,480p, 576i,576p, 720p, 1080i, 1080p
3D:720p,1080p
Video resolution
PC: VGA (640x480), SVGA (800x600), XGA (1024x768),
PCM、AAC、Dolby Digital 2.0/5.1、DTS 5.1、LPCM 5.1/7.1
Audio format
System latency
≤1ms
Range
30M LOS(MAX)
3.3W(MAX)
Power consumption
Power supply
DC 5V/1A
Protected Overvoltage
6~17V
Operation Temperature
0-60℃
Storage Temperature
-20℃ - + 80
Operation Humidity
15% - 85%
Dimension
89.5*34.5*20mm
50g(+3g)
Weight
-
Problem
TX or RX is not turned on
TX and RX are out of effective range
CP7602/3602
TX and RX are not paired yet
Connection
failure
Obstacles
exsit in
the antenna area
Antenna angle is out of effective range
CP7602/3602
The source is not turned on
No video
output
The displayer is not turned on
The resolution is not supported
CP7602/CP3602
Power on both TX and RX
Approach RX and TX to effected range
Power on TX and RX, and press code
T
key of TX for 1s
keep no obstacle in front of the TX/RX
antenna at least 2m range
Make the TX antenna and RX antenna
directly facing to each other.
Turn on the source
Turn on the displayer
Change the resolution
10
Advertisement
