Advertisement
Available languages
Available languages
CP3602
Wireless HD Receiver
Model: CP3602
1. SCAN:
Short press to wake up when product is in stand-by status
No need to press SCAN key in working status under point to point mode
2.
POWER(mini B USB)
:
mini USB socket for power supplying by USB cable.
3. HDMI OUT
:for audio and video input.
07
SCAN
POWER(mini B USB)
HDMI OUT
.
Product Installation
1. Connect the TX/RX to the soruce /display with HDMI cable / connector,
connect the TX to available USB outlet for power, connect the RX with
adapter and power on the products. Indicators of TX&RX will flash
slowly when the products are powered on.
HD player
Antenna
Laptop
HDMI Cable / HDMI
Connectors
Antenna
USB Cable
HDMI Cable / HDMI Connectors
2.
When the products are powered on and indicators of TX&RX
are flashing slowly, please press code key of TX for 1 sec and then
release, and both indicators will be flashing rapidly which means
the pairing process is done. (Original pack of TX and RX were paired
as default set in the factor y already and shall disregard current step. )
3. When the AV source player&displayer are powered on and the indicators
of TX&RX light on steadily, the video output is working normally.
Note: To obtain best performance of range , please always keep the antennas
surfaces of TX and RX are facing to each other.
Indicator will flash slowly
when TX is powered on.
TX
USB Cable
Indicator will flash slowly
when RX is powered on.
RX
HD TV
Projiecter
08
Advertisement
