Download Print this page
Hide thumbs Also See for E02GF-039-BU:

Advertisement

Quick Links

Life Gets Better With
USE AND CARE GUIDE
E02GF-039-BU
Questions, problems, missing parts? Before returning to the store,
please contact our Customer Service
service@alphamarts.com
THANK YOU
We appreciate the trust and con dence you have placed in PHI VILLA through the purchase of our product. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing PHI VILLA!

Advertisement

loading
Need help?

Need help?

Do you have a question about the E02GF-039-BU and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PHI VILLA E02GF-039-BU

  • Page 1 THANK YOU We appreciate the trust and con dence you have placed in PHI VILLA through the purchase of our product. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
  • Page 2 Table of Contents Table of Contents Pre-assembly Safety Information Assembly Warranty Care and Maintenance What is Covered What is Not Covered Safety Information • Tighten each bolt rmly and properly. Do not completely tighten screws until all screws are started. •...
  • Page 3 Pre-assembly (continued) Assemble the item on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items. NOTE: Identify all parts packed in the carton against the parts list. Remove all the protective material carefully and DO NOT use a knife to prevent scratching the furniture.
  • Page 4 Assembly...
  • Page 5 Assembly...
  • Page 6 Cleaning and Maintenance Clean the furniture with damp cloth, rinse thoroughly. Dry frame parts completely. Do not use bleach, acid or ● other solvents on the wicker or metal parts. Inspect and tighten all SCREW on a regular basis to ensure proper performance and safety. ●...
  • Page 7 THANK YOU We appreciate the trust and con dence you have placed in PHI VILLA through the purchase of our product. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
  • Page 8 Table of Contents Table of Contents Pre-assembly Safety Information Assembly Warranty Care and Maintenance What is Covered What is Not Covered Safety Information • Tighten each bolt rmly and properly. Do not completely tighten screws until all screws are started. •...
  • Page 9 Pre-assembly (continued) Assemble the item on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items. NOTE: Identify all parts packed in the carton against the parts list. Remove all the protective material carefully and DO NOT use a knife to prevent scratching the furniture.
  • Page 10 Assembly...
  • Page 11 Assembly...
  • Page 12 Assembly...
  • Page 13 Cleaning and Maintenance Clean the furniture with damp cloth, rinse thoroughly. Dry frame parts completely. Do not use bleach, acid or ● other solvents on the wicker or metal parts. Inspect and tighten all SCREW on a regular basis to ensure proper performance and safety. ●...
  • Page 14 THANK YOU We appreciate the trust and con dence you have placed in PHI VILLA through the purchase of our product. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
  • Page 15 Table of Contents Table of Contents Pre-assembly Safety Information Assembly Warranty Care and Maintenance What is Covered What is Not Covered Safety Information • Tighten each bolt rmly and properly. Do not completely tighten screws until all screws are started. •...
  • Page 16 Pre-assembly (continued) Assemble the item on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items. NOTE: Identify all parts packed in the carton against the parts list. Remove all the protective material carefully and DO NOT use a knife to prevent scratching the furniture.
  • Page 17 Assembly...
  • Page 18 Assembly...
  • Page 19 Cleaning and Maintenance Clean the furniture with damp cloth, rinse thoroughly. Dry frame parts completely. Do not use bleach, acid or ● other solvents on the wicker or metal parts. Inspect and tighten all SCREW on a regular basis to ensure proper performance and safety. ●...
  • Page 20 ASSEMBLY INSTRUCTIONS USER’S MANUAL Before starting assembly:  Read all instructions throughly. Open and check boxes for parts list.  If any parts are broken or missing call or email customer service.  Keep all packaging until you are satisfied with your product. ...
  • Page 21 Assembly Instructions Gas Fire Pit Table · DANGER FLAMMABLE GAS UNDER PRESSURE. LEAKING LP-GAS MAY CAUSE A FIRE OR EXPLOSION IF IGNITED CAUSING SERIOUS BODILY INJURY OR DEATH. CONTACT LP GAS SUPPLIER FOR REPAIRS, OR DISPOSAL OF THIS CYLINDER OR UNUSED LP-GAS. ·...
  • Page 22: Table Of Contents

    Table of Contents Table of Contents ............2 Operating Instructions .........12-14 Safety Information............2-4 Maintenance............Pre-Assembly...……………………...……………………. 5 Care and Cleaning ..........15 ..………………...……………………. 6 Troubleshooting ............ Package Contents Assembly..……………………………… ………..…8-1 Safety Information Read the instruction before use. This appliance must be installed in accordance with such regulations as are enforced.
  • Page 23: Safety Information

    Safety Information (continued) WARNING: You must provide propane gas and propane cylinder. Use a standard 20 lb. propane cylinder only. Use this heater only with a propane vapor withdrawal supply system. See Chapter 5 of the Standard for Storage and Handling of Liquefied Petroleum Gas, ANS/NFPA 58.
  • Page 24 Safety Information (continued) WARNING: Solid fuels shall not be burned in this appliance. The installation must conform with local codes or, in the absence of local codes, ANSIZ223. 1/NFPA54, NFPA58 Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2. This appliace must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psi (3.5 kPa).
  • Page 25: Pre-Assembly

    Pre-Assembly PLANNING ASSEMBLY Carefully remove all pieces from the carton and make sure that you have all parts (refer to the hardware and package contents list). If you are missing parts, please contact for further assistance. YOUR OWNER’S MANUAL Keep and store this Owner’s Manual for future reference. It contains important instructions and procedures for safety and maintenance.
  • Page 26: Package Contents

    Package Contents...
  • Page 27 Package Contents DESCRIPTION QUANTITY PART Leg A Leg B Leg C Leg D Side Panel With Window Back Panel Side Panel Door Fire Glass Table Top With Burner Door Knob Tank Support Tray...
  • Page 28 Assembly Step 1: Attach Door Knob (L) to Door Panel (H) using one M6 x 12mm Bolt(AA). Step 2: Attach the Leg (A,B,C,D)to the Table Top by using eight M6*12 Bolts. Do not tighten the bolts at this step. Step 3: Attach Side Panel With Window(E) to Leg (A) and Leg (B) by using four M6*12mm Bolts (AA).
  • Page 29 Assembly (continued) Step 4: Attached the Back Panel(F) With Side Panel (G) by using M6x10mm bolts(AA). Do not tighten the bolts at this step. Step 5: Attached the Back Panel(F) to Leg(B). Do not tighten all screws at this step. Attached the Side Panel(G) to Table Top(K).
  • Page 30 Assembly (continued) S tep 7: Attach the Tank Support (M) to Leg (A B C D) by using M6x20mm bolts(EE). Please do not tighten any bolts at this step. Step 8: Connect the Side Panel (G) to Tank Support(M) by using M6x10mm bolts( AA).
  • Page 31 Assembly (continued) S tep 10: Put the propane tank (not included) into the Tank Support (M). Secure the tank by tighting the screw in the Tank Support(M). Connect the hose and regulator to the propane tank. NOTE: USE A STANDARD 20LB PROPANE TANK ONLY.
  • Page 32 Operating WARNING: Never use this appliance for other than the intended use. DO NOT use this appliance to prepare food. Initial Lighting: When lit for the first time, the appliance emits a slight odor. This is a normal temporary condition caused by the “burn-in ”...
  • Page 33: Operating Instructions

    Operating (continued) LEAK TESTING OPERATION WARNING: A leak test must be performed annually or if a part of the gas system is replaced. WARNING: Never use an open flame to check for gas leaks. Be certain no sparks or open flames are in the area while you check for leaks.
  • Page 34 Operating (continued) LIGHTING CAUTION: Keep the outdoor gas appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquids. CAUTION: Do NOT obstruct the flow of combustion and ventilation air. CAUTION: Check and clean burner/venturi tubes for insects and insect nests. A clogged tube can lead to a fire.
  • Page 35: Maintenance

    Maintenance Storage between uses: □ Turn the control knob to “OFF” position. □ Disconnect LP source. □ Store heater upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail, snow, dust and debris). □ If desired, cover heater to protect exterior surfaces and to help prevent build up in air passages. NOTE: Wait until heater is cool before covering.
  • Page 36: Troubleshooting

    Troubleshooting PROBLEM PROBLEM CAUSE SOLUTION The flame and heat are The propane lighting Ensure lighting procedure is followed carefully. The valve low when the valve is procedure was not followed must be in the off position when the tank valve is turned on. turned to high.