Malfunctions - Bosch WAN24178IT User Manual And Assembly Instructions

Table of Contents

Advertisement

Fault
lights up.
flashes.
All other error codes.

Malfunctions

Fault
The appliance is not work-
ing.
The programme does not
start.
Cause
The filters in the water inflow
are blocked.
The tap is turned off.
The water inlet hose is
kinked or jammed.
The temperature is too high.
Water level is too high.
Laundry is caught in the
door.
Door is not closed.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed Av-
vio / Agg. bucato.
Door is not closed.
Childproof lock is activated.
Troubleshooting en
troubleshooting
"Clean the filters in the water in-
flow" → Page 43.
Turn on the tap.
Ensure that the water inlet hose is
not kinked or jammed.
Wait until the temperature has
dropped.
→ "Cancelling the programme",
Page 36
Start the Scarico acqua pro-
gramme.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Avvio / Agg. bucato to start
4.
the programme.
Close the door.
1.
Press Avvio / Agg. bucato to start
2.
the programme.
Call the after-sales service.
→ "Customer Service", Page 55
troubleshooting
Connect the appliance to the power
supply.
Check the circuit breaker in the
fuse box.
Check whether the lighting in your
kitchen or other appliances are
working.
Press Avvio / Agg. bucato.
Close the door.
1.
Press Avvio / Agg. bucato to start
2.
the programme.
→ "Deactivating the childproof
lock", Page 37
47

Advertisement

Table of Contents
loading

Table of Contents