Intermec SF51 Instructions Manual page 11

9 From the COM port drop-down list box, select the
LocalCOM-Client COM port that you noted in Step 9 on
page 9.
10 Click Next, and click Next again. The Enter a name and
select an icon window appears.
11 (Optional) Change the information in the Setting
information box, and click Next.
12 Click Finish. Your scanner appears in the Bluetooth Settings
application.
13 Right-click your scanner, and select Connect.
Your PC connects to your scanner, your scanner emits a series
of beeps from low to high, and the blue Intermec Ready-to-
Work indicator turns on and stays on.
To disconnect
• From the Bluetooth Settings application, right-click your
scanner, and select Disconnect.
The scanner disconnects from your host PC, emits a series of
beeps from high to low, and the blue Intermec Ready-to-
Work indicator turns off.
Collecting Data With Your Scanner
1 Start your data collection application.
2 If necessary, configure your data collection application to
receive data from the Bluetooth COM port.
3 Scan a bar code with your scanner. The data is entered into
your application.
For more information about Bluetooth Settings, see the
Bluetooth Settings online help.
11