Clarion MAX385VD Owners & Installation Manual page 40

5.
INSTALLING THE MAIN UNIT
2. Wire as shown in Section 7 (see page 72).
3. Reassemble and secure the unit in the
dashboard and set the face panel and center
panel.
This unit is designed for fixed installation in the
dashboard.
1. When installing the main unit in NISSAN
vehicles, use the parts attached to the unit
and follow the instructions in Figure 6.
When installing the main unit in TOYOTA
vehicles, use the parts attached to the vehicle
and follow the instructions in Figure 7.
r - - - -
Mounting Screw Holes (Side View of the Main Unit) - - - - - ,
r
jJr
l\
r
~@~
~
"
,
~r®
~@~
®
""-
~
""-
For NISSAN vehicle For TOYOTA vehicle
Installing the Main Unit in
a
NISSAN Vehicle
Finisher (*1 )
Mounting bracket - - - - - '
(1 pair for the left and right sides)
Figure 6
Note:
*1: Position the face panel with its wide edge at the
bottom. Fit the edge into the groove of the main
unit.
VRX48SVD/MAX38SVD
40