Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Foresight Sports Manuals
  4. Sports & Outdoors
  5. SIM IN A BOX BIRDIE SIAB ENCLOSURE
  6. Assembly instructions manual

Foresight Sports SIM IN A BOX BIRDIE SIAB ENCLOSURE Assembly Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the SIM IN A BOX BIRDIE SIAB ENCLOSURE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Foresight Sports SIM IN A BOX BIRDIE SIAB ENCLOSURE

Summary of Contents for Foresight Sports SIM IN A BOX BIRDIE SIAB ENCLOSURE

  • Page 2: Table Of Contents

    TABLE OF CONTENTS SPECIFICATIONS SAFETY INSTRUCTIONS WHAT’S INCLUDED OVERVIEW OF ENCLOSURE FRAME ASSEMBLY 5-11 ENCLOSURE ASSEMBLY 12-17...

  • Page 3: Specifications

    SPECIFICATIONS PRODUCT NAME BIRDIE SIAB ENCLOSURE x 10’10” x 17’ ENCLOSURE DIMENSIONS 8’4” RECOMMENDATIONS A STEP-STOOL OR LADDER WILL BE NEEDED DURING ASSEMBLY. IT IS RECOMMENDED THAT AN ADDITIONAL PERSON ASSIST IN THE ASSEMBLY OF THIS ENCLOSURE. WEIGHT 117 LBS. COLOR BLACK SURROUND/FRAME WHITE IMPACT SCREEN...

  • Page 4: Safety Instructions

    - When not in use, store neatly in a cool, dry location, and pro- tected from weather elements and direct sunlight. - Foresight Sports is not responsible for any damage to proper- ty and/or any personal injury. - Be mindful of disconnected and falling pipe if not snapped/ tightened properly.

  • Page 5: What's Included

    WHAT’S INCLUDED BIRDIE ENCLOSURE (18) COLOR CODED SNAP-BUTTON POLES (1) PREMIUM IMPACT SCREEN (1) BLACK NYLON SURROUND (4) FOAM PADDING STRIPS (2) L-SHAPED CONNECTORS (6) 3-WAY CONNECTORS (2) SIDE BARRIER NETS (2) SAND BAGS (80) BALL BUNGEES...

  • Page 6: Overview Of Enclosure

    OVERVIEW PREMIUM IMPACT SCREEN The Premium Impact Screen was designed to allow the image to fill in 100% of the screen, unlike other enclosure systems where there is white space at the top and bottom. Constructed of pre- mium materials, your golf simulator screen displays in HD quality and is built tough to withstand golf ball strikes up to 250 MPH.

  • Page 7: Frame Assembly

    FRAME ASSEMBLY Lay out poles and connectors. Organize by color. (4) PURPLE poles with a single stripe on one end and double stripes on the opposite end. (4) BLUE poles with single stripes on both ends. (3) YELLOW poles with single stripes on one end and double stripes on the opposite end.
  • Page 8 FRAME ASSEMBLY (4) GREEN poles with single stripes on both ends. (3) ORANGE poles with single stripes on both ends. TIP: In the follow- ing steps, you will connect the GREEN single stripe end to the connector piec- es. You will connect the YELLOW single stripe ends to the ORANGE...
  • Page 9 FRAME ASSEMBLY Assemble the back lower poles first. Attach a YELLOW pole to an ORANGE pole. After, attach a 3-way con- nector to each end. REMEMBER: Connect the double striped end of the YEL- LOW pole to the single striped end of the ORANGE pole. And the 3-way connectors will attach to the single striped end of each pole.
  • Page 10 FRAME ASSEMBLY Connect (4) BLUE poles to the corner connectors that will act as bottom uprights for the structure TIP: At this point in the assembly, make sure button snaps are fully engaged in each fitting. Also, this would be a good time to place the structure near its final location due to the added weight of the screen and surround in future steps.
  • Page 11 FRAME ASSEMBLY Connect (4) PURPLE poles to the BLUE uprights to complete the vertical assembly. Next, attach the (4) remaining 3-way connectors to the open ends of the PURPLE poles.
  • Page 12 FRAME ASSEMBLY Start with the back section and attach (1) ORANGE pole to the back-right 3-way connector. After, attach (1) YELLOW pole to the ORANGE pole and then attach that YELLOW pole to the back-left 3-way connector. Repeat these same steps for the front facing upper section.
  • Page 13 FRAME ASSEMBLY To complete the frame structure, attach the (2) re- maining GREEN poles to the open 3-way connectors at the top.

  • Page 14: Enclosure Assembly

    ENCLOSURE ASSEMBLY In this section, you will attach the black surround to the frame, along with the impact screen. You will need a ladder and it is recommended to have an additional person to assist with the following steps. Unfold the black surround position it to the outside...
  • Page 15 ENCLOSURE ASSEMBLY Unfurl the black surround and bring it over the top of the GREEN pole (with the assistance of another per- son), and bring the surround across the structure so that it crosses atop the opposite GREEN pole and then down the opposite side of the frame.
  • Page 16 ENCLOSURE ASSEMBLY TIP: Start by connecting the bottom flaps of the black sur- round by sliding the inside piece under the bottom pole and then folding it up to secure it with the velcro strip. Once the velcro is in place, connect black surround with...
  • Page 17 ENCLOSURE ASSEMBLY TIP: Before han- dling the impact screen, wash your hands thoroughly to avoid blemish- es or stains on the white materi- al. And make sure the floor is clean too. Begin by using (4) bungee balls to at- tach the screen to the four corners.
  • Page 18 ENCLOSURE ASSEMBLY The (4) foam pads can now be added to the enclosure. There are (2) long pads that will be attached to the velcro along the top and bottom of the screen, and (2) shorter pads that will attach to the two sides of the screen.
  • Page 19 ENCLOSURE ASSEMBLY To complete the enclosure and to protect walls, win- dows, and others from errant golf shots, add the side barrier netting to the sides of the enclosure. Simply attach the velcro side of the net along the front poles and black surround velcro strip.