Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Foresight Sports Manuals
  4. Sports & Outdoors
  5. SIM IN A BOX EAGLE PLUS
  6. Assembly instructions manual

Foresight Sports SIM IN A BOX EAGLE PLUS Assembly Instructions Manual

Hide thumbs

Advertisement

Quick Links

ASSEMBLY INSTRUCTIONS
EAGLE PLUS / BIRDIE PACKAGE
VERSION 1.2

Advertisement

loading
Need help?

Need help?

Do you have a question about the SIM IN A BOX EAGLE PLUS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Foresight Sports SIM IN A BOX EAGLE PLUS

Summary of Contents for Foresight Sports SIM IN A BOX EAGLE PLUS

  • Page 1 ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2...
  • Page 2 BEFORE YOU GET STARTED THANK YOU for purchasing our SIM-IN-A-BOX package. We're sure this package will provide you with years of enjoyment. to insure your safety and those using your simulator: to safely install approximately 9 feet tall x 16 feet deep x 13 feet wide. Make sure you have extra space for the assembly process.
  • Page 3 BEFORE YOU GET STARTED during the assembly process. The frame assembly requires TWO PEOPLE to safely complete. REQUIRED FOR THIS STEP (See Page 5) to insure a safe assembly and setup process. Following these simple guidelines will insure you get the most out of your purchase, the safest way possible.
  • Page 4 CONTENTS INSIDE THE BOX COMPONENTS (1) Frame Assembly System (1) Front (Hitting) Screen (1) Back Screen (2) Inner Walls (2) Outer Wall Covers (1) Lid Panel (1) Above Screen Panel (1) Blackout Panel (1) Rolling Computer Cart (2) Rolls of Turf (1) Hitting Mat and Tray System (1) Wireless Keyboard/Trackpad (1) Projector with Power and HDMI Cables...
  • Page 5 REQUIRED TOOLS & ITEMS REQUIRED TOOLS (NOT INCLUDED) (2) 6-8' Ladders RECOMMENDED TOOLS (NOT INCLUDED) Impact Drill with 3/8" Impact Adapter Snips for cutting Zip Ties Work Gloves Eye Protection Glasses ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 5...

  • Page 6: Table Of Contents

    T A B L E O F C O N T E N T S Page 7 STEP 1: FRAME ASSEMBLY Page 16 STEP 2: TURF & SCREEN Page 25 STEP 3: EXTERIOR PANELS Page 33 STEP 4: COMPONENT SETUP Page 42 STEP 5: SOFTWARE SETUP ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE...

  • Page 7: Step 1: Frame Assembly

    STEP 1: FRAME ASSEMBLY Locate the (L-Shaped) and the components. Insert the Center Base into the Left Base as shown. Secure with 1 frame assemby screw. Left Base Center Base Locate the (L-Shaped) component. Attach to the Base Assembly by repeating Step 1A.
  • Page 8 STEP 1: FRAME ASSEMBLY With the Base Assembly completed, locate the components. Connect the components as shown. Secure with 2 frame assemby screws. Base Assembly Left Wall Top Left Wall Bottom ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 8...
  • Page 9 STEP 1: FRAME ASSEMBLY Orient the Left Wall Assembly vertically as shown with the top assembly trays facing INWARD. Top Assembly Trays Left Wall Assembly Base Assembly Connect the two assemblies as shown. Secure with 1 frame assemby screw. ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 9...
  • Page 10 STEP 1: FRAME ASSEMBLY Locate the components. Repeat Steps 3A + 3B to assemble and connect the Right Wall Assembly Right Wall Bottom Right Wall Top ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 10...
  • Page 11 STEP 1: FRAME ASSEMBLY Locate the two (2) components and one components. Connect the components as shown. Secure with 2 frame assemby screws. Top Corner Span Top Center Span Top Corner Span ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 11...
  • Page 12 STEP 1: FRAME ASSEMBLY Using a ladder and with the help of an asssitant, carefully lower the Top Span assembly onto the BACK Assembly Trays of the Main assembly. BACK Top Span assembly Main assembly Secure with 2 frame assemby screws. ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 12...
  • Page 13 STEP 1: FRAME ASSEMBLY Locate the two (2) components and one Repeat Steps 5 - 6 to assemble and place the FRONT Top Span to the Main Assembly. FRONT Top Span assembly Main assembly ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 13...
  • Page 14 STEP 1: FRAME ASSEMBLY Great job! The frame assembly is now complete. DOUBLE-CHECK! With the frame now assembled, please re-check that all assembly bolts are tight and the frame is stable and rigid. ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 14...
  • Page 15 STEP 2: TURF & SCREEN Locate the Interior Turf roll and place it inside the assembled frame. ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 15...

  • Page 16: Step 2: Turf & Screen

    REQUIRED FOR THIS STEP STEP 2: TURF & SCREEN Locate the Mesh Screen Backing and the Top Attachment Cord Attach the Top Attachment Cord to the frame by placing the hook into the steel eye hook located on the inside top of the rear LEFT support as shown. ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 16...
  • Page 17 REQUIRED FOR THIS STEP STEP 2: TURF & SCREEN Unfold the Mesh Screen Backing and thread the Top Attachment Cord through the top row of grommets holes STARTING WITH THE SECOND HOLE as shown. Thread the Top Make sure the vertical strips of velcro are facing forward.
  • Page 18 REQUIRED FOR THIS STEP STEP 2: TURF & SCREEN Attach the Top Attachment Cord to the frame by placing the hook into the steel eye hook located on the inside top of the rear RIGHT support as shown. Tighten the Top Attachment Cord by pulling on the loose end located on the left side. The included pulley system will prevent the cord from loosening once pulled.
  • Page 19 REQUIRED FOR THIS STEP STEP 2: TURF & SCREEN With the Top Attachment Cord pulled tight and the Mesh Screen Backing spread out evenly, locate the two (2) provided Zip Ties and secure the OUTER grommet holes of the Mesh Screen Backing to the steel eye hooks holding the Top Attachment Cord on each side of the frame.
  • Page 20 REQUIRED FOR THIS STEP STEP 2: TURF & SCREEN Locate the long Zip Tie provided and place it around both the center of the Rear Top Frame Support and the Top Attachment Cord as illustrated below. Use to Zip Tie to raise the Mesh Screen Backing until it is LEVEL with both sides, and then secure as shown.
  • Page 21 REQUIRED FOR THIS STEP STEP 2: TURF & SCREEN Secure the Mesh Screen Backing to the Frame Assembly by attaching the vertical velcro edges on each side of the Mesh Screen Backing to the vertical velcro edges on the back of the both rear frame support columns.
  • Page 22 PAGE 22...
  • Page 23 REQUIRED FOR THIS STEP STEP 2: TURF & SCREEN Using the provided wire feeder, feed the Bottom Attachment Cord through the bottom edge sleeve of the Mesh Screen Backing as illustrated. Tie the Bottom Attachment Cord securely to the lower LEFT steel eye hook, then pull the cord on the RIGHT until there is a small amount of tension on the cord before securing to the lower RIGHT steel eye hook.
  • Page 24 REQUIRED FOR THIS STEP STEP 2: TURF & SCREEN It is now time to attach the Hitting Screen to the Mesh Screen Backing. To begin, being careful to maintain a straight alignment without wrinkles. CAUTION: When disassembling, use care not to tear the back screen. Should any wrinkles be present, adjust the velcro attachment around the problem area.

  • Page 25: Step 3: Exterior Panels

    REQUIRED FOR THIS STEP STEP 3: EXTERIOR PANELS SIDES and BACK of the Frame Assembly. Once the Lid Panel is properly aligne, remove the protective strip covering the velcro running along the (under side) front edge. ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 25 PAGE 24...
  • Page 26 REQUIRED FOR THIS STEP STEP 3: EXTERIOR PANELS Pull the front edge of the Outer Lid Panel over and around the front bar of the Frame Assembly with even pressure and secure it to the underside surface using the velcro strip. ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 26...
  • Page 27 REQUIRED FOR THIS STEP STEP 3: EXTERIOR PANELS Locate the (2) Inner Side Panels. Attach the LEFT Inner Side Panel to the inside top left of of the Frame Assembly. Approximately six (6) inches of the Left Side Panel should stick out beyond the front of the frame.
  • Page 28 REQUIRED FOR THIS STEP STEP 3: EXTERIOR PANELS Pull the front edge of the Inner Side Panel over and around the side bar of the Frame Assembly with even pressure and secure it to the outside surface using the velcro strip on the frame. REPEAT Steps 2A - 2B with the RIGHT Inner Side Panel.
  • Page 29 REQUIRED FOR THIS STEP STEP 3: EXTERIOR PANELS Locate the (1) Above Screen Panel and attach to the top edge of the Hitting Screen using Once the Above Screen Panel is properly aligned and secured to the top edge of the Hitting Screen, remove the protective strips covering the velcro running along the front and side edges.
  • Page 30 REQUIRED FOR THIS STEP STEP 3: EXTERIOR PANELS Starting in the center, attach the Above Screen Panel to the Lid Panel using the velcro strip, being careful to keep the edge straight and smooth as you move to each corner. ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 30...
  • Page 31 REQUIRED FOR THIS STEP STEP 3: EXTERIOR PANELS Locate the (2) Outer Side Panels. Starting at the top, attach the LEFT Outer Side Panel to the edges before attaching the panel down the front and back edges, being careful to keep the edges straight and smooth as you move downward.

  • Page 33: Step 4: Component Setup

    STEP 4: COMPONENT SETUP Locate the second (outer) Turf Roll and unroll & position it in front of the ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 33 PAGE 32...
  • Page 34 STEP 4: COMPONENT SETUP Follow the separately included instructions for the assembly of the Hitting Mat. Follow the separately included instructions for the assembly of the Rolling Computer Cart. NOTE: Do NOT attach the provided back panel to the middle shelf. This will obstruct the placement of the projector.
  • Page 35 STEP 4: COMPONENT SETUP Place the Rolling Computer Cart in the correct position based on player handedness. RIGHT-HANDED (most common) LEFT-HANDED (less common) ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 35 PAGE 34...
  • Page 36 STEP 4: COMPONENT SETUP Place the computer, Mouse/Keyboard, and Projector on the Rolling Computer Cart as shown. Then connect the following: Connect the projector to the Computer using the provided HDMI cable. Connect the Wireless Mouse/Keyboard to the Computer via BlueTooth. Connect the Computer to the internet via Ethernet, or connect via WiFi if available.
  • Page 37 STEP 4: COMPONENT SETUP Place the Launch Monitor on the Hitting Mat. the Turf & Hitting Mat. Placement of the launch monitors should be: from screen from centerline GCQuad 9'5" 1' 10" 9'5" 1' 6" ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 37 PAGE 36...
  • Page 38 STEP 4: COMPONENT SETUP Connect the Launch Monitor to the Computer using the provided USB Cord. Connect the Launch Monitor to a power source using the provided Power Cord. GCQuad Additional Connection Options If your package comes with the GCQuad, you may also connect to the computer via Ethernet or WiFi.
  • Page 39 STEP 4: COMPONENT SETUP Power ON the Launch Monitor, Computer, and Projector. ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 39 PAGE 38...
  • Page 40 STEP 4: COMPONENT SETUP With the Projector on and projecting an image, move the Rolling Computer Cart toward the Hitting Screen until the image covers ALL FOUR CORNERS of the screen. ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 40 PAGE 39...
  • Page 41 STEP 4: COMPONENT SETUP Use the Projector’s included remote to calibrate the projector, including aligning the corners of the projected image with the screen (using the KEYSTONE ADJUST feature) ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.2 PAGE 41 PAGE 40...

  • Page 42: Step 5: Software Setup

    SOFTWARE SETUP Power on the computer and navigate to the Windows desktop. Locate the Foresight Sports Software icon on the desktop and double click to launch. Important! If you FSX Live username and password had been created and provided to your Foresight Sports representative, then we have activated your software and assigned your courses to your username.
  • Page 43 STEP 5: SOFTWARE SETUP Launch the Foresight Sports Software. PLEASE NOTE: This software requires internet access to validate. Internet access will also allow your software to communicate to the Foresight cloud for additional FSX LIVE features. Connect the Launch Monitor.
  • Page 44 STEP 5: SOFTWARE SETUP Navigating the Software. With the Launch Monitor now connected, you may begin navigating and using the software. For detailed information on the FSX software, please use the resources below: FSX Live User Guide: https://www.foresightsports.com/fsx-2020-user-manual Foresight Fairgrounds: https://www.foresightsports.com/foresight-fairgrounds-user-manual All support information can be found by scanning the QR Code below: www.foresightsports.com/library...

This manual is also suitable for:

Sim in a box birdie packageEagle plusSim in a box