Sensor Electronics SEC 3100 Instruction And Operation Manual page 10

V. MENU OPERATION
Inital Power Up Sequence of the SEC 3100
SYSTEM BOOT PROCESS
--- WAIT FOR SYNC –-
SYSTEM BOOT PROCESS
-WAIT FOR SENSOR -
INITIALIZING
WARM
UP
WARM
UP
ENT TO ABORT
ID: 1
0
In normal operating mode. Actual gas concentration will be displayed to the left of ID #, Range, Gas
Type, MC (Memory Card) status.
During Warm Up, FAULT LED will be solid Blue and ALARM LED will be falshing Yellow – Blue.
MC – REMOVED indicates the MEMORY CARD (MC) in not installed in the SEC 3100. Other MC
indications are OK, FAULT, FULL.
ID: xx
SN: xxxxx
TYP: x.x
VER: x.x
ID: xx
0-20.0PPM
WF6
0-20.0 PPM
WF6
MC - REMOVED
Part Number: 1460105
REV: A