Advertisement
Quick Links
Advertisement
Related Manuals for Intelbras XSA 1000
Summary of Contents for Intelbras XSA 1000
- Page 1 User’s Manual XSA 1000 XSA 1000 BLACK...
- Page 2 Congratulations, you just have purchased a product with Intelbras quality and safety. The XSA 1000 / XSA 1000 BLACK universal support was structured to fit perfectly in most presence sensors available in the market and oth- er equipments with compatible features, and also have a wide direc- tion angle, support to wiring passage and UV protection for installing in outdoor environments.
- Page 3 Caution and safety » LGPD – Data processing by Intelbras: Intelbras does not access, transfer, capture or perform any type of processing of personal data from this product. » Follow all instructions in the manual for assembling and installing the product;...
-
Page 4: Table Of Contents
Summary 1. Technical specifications 2. Product 3. Features 4. Installation Term of Warranty... -
Page 5: Technical Specifications
1. Technical specifications General features Material Plastic with UV protection Weight 44 g Load capacity 1.5 kg Installation environment Internal / external Size (W × H × D) 99 × 58 × 64 mm Horizontal movement angle 160° Vertical movement angle 160°... -
Page 6: Features
Mounted support Mounted support 3. Features » Made of UV protected material; » Easy to install; » Wide application scenario; » Compatible with most presence sensors available in the market and other equip- ments for the same applications and purpose. 4. - Page 7 » Attach the support to the base of the sensor or product to be used as shown in the image below, use the fixing screws that come with the XSA 1000 support, then insert the shaft through the hole, rotating clockwise until you feel that it is stuck.
- Page 8 Note: It is important to use the locks for fixing the wiring, as they prevent water from entering the inside of the sensor conducted by the wiring. Cable Wiring lock Wiring lock Wired base rear view » If the sensor is installed on a flat surface, use the four innermost holes in the base for mounting.
- Page 9 » After definitively fixing the base, direct the sensor to the desired detection field, always respecting its specifications. Lock the sensor position by turning the fixing ring clockwise until you feel that it is firm. » The corner fixing tabs can be easily detached if not in use. Detaching the base...
-
Page 10: Term Of Warranty
Term of Warranty It is expressed that this contractual warranty is granted according to the following conditions: Customer name: Customer’s signature: Tax Invoice No. Date of Purchase: Model: Serial No.: Retailer 1. All parts, pieces and components of this product are warranted against any man- ufacturing defects, which may arise within a period of 1 (one) year - being 90 (ninety) days of legal warranty and 9 (nine) months subject to contractual warran- ty - from the date when the Customer purchased the product, according to the... - Page 11 Customer to regularly make secure backup of the product data. 7. Intelbras is not liable for the installation of this product, as well as eventual at- tempts of fraud and/or sabotage in their products. Keep software and applications up to date, and if necessary, the required network protections against intrusions (hackers).
- Page 12 Support via e-mail: suporte@intelbras.com.br Customer Service: 0800 7042767 Where to buy? Who installs it? 0800 7245115 Produced by: Intelbras S/A – Indústria de Telecomunicação Eletrônica Brasileira Rodovia BR 459, km 124, 1325 – Distrito Industrial – Santa Rita do Sapucaí/MG – 37540-000 01.22 CNPJ 82.901.000/0016-03 –...
Need help?
Do you have a question about the XSA 1000 and is the answer not in the manual?
Questions and answers