BoomToneDJ BOOMPAD 800 User Manual page 7


Always make sure that the speaker is placed on a flat, stable and level surface
(make sure that the legs of your tripod are fully extended for stability).
It is best to get someone to help you set up the speaker at height.

BoomToneDJ accepts no liability for damage to property or persons caused by
improper handling or failure to observe the safety instructions. The warranty
does not apply.

Unauthorised modifications to the device are prohibited for safety and licensing
reasons (CE).

The device belongs to the protection class lI, it must be supplied with 220 -
240V~ 50/60 Hz via the supplied adapter. Never attempt to supply the device
with any other voltage.

Never connect or disconnect the mains plug with wet hands

To preserve the life of your battery, it is advisable to store it fully charged.

There are no user-serviceable parts or components. Do not attempt to open the
unit yourself. In the event of a fault, contact your dealer. Any attempt by the user
to repair the unit will void the warranty.

Never connect the appliance immediately after moving from a cold to a warm
place. The condensation water that forms may damage the appliance or cause
an electric shock. Wait until the appliance has reached room temperature before
plugging it in. Wait until the condensation water has evaporated, which may take
a few hours.
IMPORTANT NOTE: Electrical products should not be disposed of with
household waste. Please have them recycled at specialised centres. Consult
your local authority or dealer on how to recycle them.
ATTENTION!
Hearing damage.
High power levels can cause lasting hearing damage. Therefore, avoid proximity to
loudspeakers used at high power levels. At high power levels, use hearing protection.
Avoid prolonged exposure to SPL levels above 90dB
7