Table of Contents
Advertisement
1.
Clean the main body and control panel.
Slightly dirty: Please wipe with a soft, dry cloth that is soft and free of any chemicals.
Please note that the fabrics containing chemical substances may discolor the body.
2.
Clean oil stain.
Clean housing with cloth and a little tooth paste or neutral detergent, wipe it again with
a clean wet cloth. Do not wash by water directly to avoid electric shock and damage.
3.
Storage
Please clean the machine according to the above method, and then use the original
packaging (plastic bag, polyfoam, color box) to prevent small insects and dust from
getting inside.
ATTENTION:
Always keep the bottom of the ceramic stew pot and the heating plate CLEAN and DRY, any
foreign substance between them will cause the stew cooker to malfunction.
Do not damage or dent housing to avoid the stew cooker burning out.
WARNING:
Beware of the hot surface while the appliance is in operation or just finished. Do not touch it
directly.
People with limited physical, sensorial or mental capabilities, or uninformed or inexperienced
persons (including children) are not permitted to use this appliance, except when supervised
by a person responsible for their safety or are instructed by this person on exactly how to use
this appliance.
Code
Object on base and/or
heating element
Inner pot misplaced and
E1
not connected to heating
element properly
Temperature probe or circuit board
failure
Temperature probe or circuit board
E2
failure
TROUBLESHOOTING:
Problem
Power off, clear the object after
heating element cools down
Power off, check the pot to make sure it
is secured into position after heating
element cools down
Send to authorized service center
Send to authorized service center
7
Solution
Advertisement
Table of Contents
