Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ocean Matrix OMX-07HMHM0001
Summary of Contents for Ocean Matrix OMX-07HMHM0001
-
Page 2: Specifications
2.0 unit supports up to 4K@60Hz with flexible switching options for ease of use, as well as digital and analog audio extraction. The OMX-07HMHM0001 also supports mixed 4K & 1080p display outputs and features built-in downscaling for simultaneously displaying 4K content to a 4K monitor and 1080p content to a 1080p monitor. -
Page 3: Operation Controls And Functions
Operating Instruction Operation Controls and Functions: LCD Screen / IR Receiver Window Output 1-4: Press to choose an output, press again to cancel. Press and hold to choose all outputs, press and hold again to cancel all. Input 1-4: Press to choose one input, workable only if output is already choosen, press and hold to choose one input for all outputs. -
Page 4: Connecting And Operating
Operating Instruction Analog Audio Out S/PDIF Audio Out RS232 Control IR-Ext Ethernet Port DC12V/2A Input HDMI Output HDMI Input Connecting and Operating: Connect source devices to input ports of the matrix Connect HDMI output ports to a TV or other HDMI devices Optional: Connect RS232 cable from PC RS232 port Optional: Connect an ethernet cable from the TCP/IP port on the matrix to a local network Connect 12V power supply to DC power socket... -
Page 5: Remote Control Description
Operating Instruction Remote Control Description: Power On / Standby M: Turn off the HDMI output audio W: Lock remote control Outputs 1-4 All: Selects all outputs X: Turn off ouput channel PTP: Mirror all inputs and ouputs Ex. Input 1 to output 1, input 2 to ouput 2 etc.. -
Page 6: Video Control
Operating Instruction Panel Control Description: Video Switch Operation: Signal switching options includes 4 switching channels, which can be randomly configured as intput/output according to requirements to form a 1x4 to 4x4 matrix. It can switch any input signal to 1 channel output or all channel outputs. Operation format: "Output channel"... - Page 7 Operating Instruction Output Switch Control: Video output is open by default but you can open/close any output port, or open/close all output ports: In the main menu, select "Video" and press "Enter" button Press "up and down" button to select "On/Off" Press "Enter"...
- Page 8 Operating Instruction Audio Control Interface: There are 2 sub-menus in audio control interface: Line out & De-Embed (both are default open)
-
Page 9: Operation
Operating Instruction Switch Output Audio: "Line out" means switch HDMI output audio, you are able to mute the TV from any one HDMI output channel Operation: Select "Audio" in main menu and press "Enter" button Press "up and down" button to select "Line out", press "Enter" button, you are then able to select output 1-4 and all by pressing the "up and down"... - Page 10 Operating Instruction Ex. Switch default1 to output1: Operation: Select "EDID" in the main menu and press the "Enter" button Press the "up and down" button to select "Input1" Press the "Enter" button to enter the next sub-menu Press the "up and down" button to select "Default1", press "Enter" to complete setting Behind the selected EDID, it will show the max support resolution, audio format and audio channel...
- Page 11 Operating Instruction Preset Application: The Preset interface can save the current video, audio, EDID, system settings, etc..., supports 8 different presets, can preset through the web, command, panel button, and recall Preset control interface has three sub-menus: Call Scene Save Scene Clear Scene Operation: Select "Preset"...
-
Page 12: Setup Interface
Operating Instruction Setup Interface Setup interface can set serial port baud rate, DHCP switch, device reboot and factory reset. Baud Rate Setting: Baud Rate Setting 4 options for baud rate setting: 9600, 19200, 57600, 115200. The default serial port is 115200 The below example is setting baud rate to 9600 Operation... - Page 13 Operating Instruction DHCP Switch: DHCP On: dynamic IP address; DHCP Off: static IP address (default is DHCP off) DHCP on operation: Select “Setup” in main menu and press the ”Enter” button Press the “up and down” button to select “DHCP” setting Press “Enter”...
- Page 14 Operating Instruction Factory Reset: There are two factory settings: Factory Common: factory reset for video switch, EDID, audio and settings (IP address can’t be factory reset when under “common”) Factory All: factory set for video switch, EDID, audio, settings, presets and device name Ex factory all operation: Select “Setup”...
- Page 15 Operating Instruction Query Information Interface: System interface q uery company name, device name and version information ： IP interface q uery device IP address, MAC address and DHCP status ： Operation ： Select “INFO” in main menu and press ”Enter” button Press the “up and down”...
- Page 16 Operating Instruction...
- Page 17 Operating Instruction 9. RS232 Control 9.1 Open CommUart Assistant. 9.2 Comport setting: Choose correct COM port that connect to PC in parameter configuration area Baud Rate: 115200 bps(Default) Parity: None Data Bit: 8bit Stop Bit: 1bit 9.3 Enter Port Command in Send options. 9.4.Command List 1).All commands start with “#”...
- Page 18 Operating Instruction Web Control: Change IP Address of PC: Before configuring the device through the website, it is necessary to configure the IP address of the computer configured with the device (mainly to ensure that the computer and the device are set in the same network segment). 1).
-
Page 19: Operation Steps
Operating Instruction Log in by Browser: Default IP address for log-in: 192.168.1.168 Type in user name and password (default user name: admin; default password: 123456) Note: it is suggested to use newer versions of Google, firefox, etc.. for better compatibility. Video interface: 1. -
Page 20: Audio Interface
Operating Instruction Audio Interface: 1. Click output1-4 HDMI T urn off HDMI output audio ： ； Operation: Ex: Turn off audio on the unit connected to HDMI output1 (TV) Click output1 HDMI, color will change on the TV, will only display video (no audio) Re-click to turn on audio 2. - Page 21 Operating Instruction EDID Interface: Input: 00>> Input1, 00~16: EDID number, Input1~4: HDMI input1~4 Ouput: 00~03: Default EDID, 04~07: User EDID, 08~11: Copy EDID, 12~15: Input EDID, 16: Temp EDID, refer to below for more details: EDID information: show EDID here: click "00>> Input1" or 00: "Default1", will show resolution, audio, audio channel, HDR and serial number Edit user EDID: Click "Edit User EDID", choose default, user, copy, input EDID on "EDID Edit Page"...
- Page 22 Operating Instruction Network Interface: MAC address can not be modified, for display only. Static IP: Click DHCP switch (DHCP Off), you can modify IP address, then click “Apply” button, it will then countdown. If device IP address is the same as client IP, it will re-login into the web interface.
- Page 23 Operating Instruction System Setting Interface: 1. System Setting ： Reboot: Click to reboot device Factory Common: Click to reset device for partial function Factory All: Click to reset device totally “Reboot” will not clear user parameter; ”Factory Common” will not clear Network and Preset parameter;...
-
Page 24: Product Service
PRODUCT SERVICE Damage requiring service: The unit should be serviced by qualified service personnel if: (a) The DC power supply cord or AC adaptor has been damaged (b) Objects or liquids have gotten into the unit (c) The unit has been exposed to rain (d) The unit does not operate normally or exhibits a marked change in performance;...