Products must be used, installed and operated in accordance with this manual. You may not be able to claim on the Electrolux manufacturer’s warranty in the event that your product fault is due to failure to adhere to this manual.
Page 3
5. DAILY USE - WASHING (Only) 11. CARE AND CLEANING Loading The Laundry 11.1 External Cleaning ....19 ......29 Using Detergent And Additives 11.2 Descaling ... 19 ........29 Options Setting ......20 11.3 After Each Wash ......29 Starting A Cycle ( ....
SAFETY INFORMATION 1.1 Conditions Of Use This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environtment; farm houses; by clients in hotels, motels, and other residential type environments;...
1.2 Child Safety This Wahser-Dryer is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance. The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach.
Under no circumstances should you For safety reasons do not use attempt to repair the machine double adaptors, extension cords and multi-plug adapters. yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Centre.
Page 7
The users should always check that If it is unavoidable that fabrics contain they have not left their gas lighters vegetable or cooking oil or have been (disposable or otherwise) in their contaminated by hair care products be placed in washer-dryer, it should clothing.
PRODUCT DESCRIPTION 2.1 Parts Worktop Detergent/Softener Control Panel Dispenser (see page 10) (see page 19) Door Cabinet Drain Pump Filter Front Panel (see page 30) Level Adjustment Feet (Front) Mains Cable Transit Bolts Transit Bolts & Hose Support Water Inlet Hose...
Detergent/Softener Dispenser (For more informations, see page 19, 29) Transit Bolt (when remove) Prewash Main Wash Softener Door (when open) (for more informations, see page 19) Drum Lifter Transit bolts must be removed before using the appliance. Stainless Steel Washing Drum 2.2 Accessories Plastic Caps To close the holes on...
3.2 Program Chart Program; Max. Max. Load Type of load and soil level Temperature Spin (Dry Clothes) range Speed Wash Cottons; 1400 11 kg 7 kg White and coloured cotton. Cold to 90°C Mixed; 1200 Synthetic or mixed fabric items. 4 kg 3 kg Cold to 60°C...
Program; Max. Max. Load Type of load and soil level Temperature Spin (Dry Clothes) Speed range Wash 1200 1 kg 1 kg Non-Stop washing and drying program for WashDry 60; 3 - 5 shirts with lightly soil. 30°C, 40°C Favourite –...
3.4 Options ) Touchpad Select “ ” option to turn Wash/Dry Mode Touchpad ON the sensors for the dirt and detergent residue. This touchpad is used to select Program Mode of your machine. Program mode The “SensorWash” is switched ON available are : by default.
Page 14
Delay Start Touchpad Vapour ( ) Touchpad Select this option to add approximately This option makes it possible to delay the 30 minutes of tumbling in vapour during start of the program by 30 min, 60 min or the wash cycle. Vapour helps open fabric...
Page 15
Dryness Level Touchpad Press this touchpad to set dryness level At the end of the program the using auto sensing feature. The display appliance performs the anti-crease will show the selected option. phase for approximately 10 minutes. During this time, the display will show Extra dry time remaining “...
Page 16
Time Dry ( ) Touchpad If you wish to carry out a timed drying At the end of the program the program, keep pressing this touchpad appliance performs the anti-crease until the desired time is reached. phase for approximately 10 minutes.
3.5 Settings To deactivate the function, press and hold “Prewash” touchpad about 2 seconds until the display shows the Save Favourite ( ) Program icon “ ”. Program settings that are frequently used can be saved (e.g. Cotton, 60°C, 1200 rpm, with Prewash and Vapour). Enabling/Disabling End-Of-Wash To program/re-program Favourite with Buzzer...
Add Clothes ( To interrupt a program which is running, press this touchpad to pause You can only add clothes when the machine, the Start/Pause pilot the icon “ ” shown on the light flashes. display. To restart the program from the point...
DAILY USE - WASHING (Only) 5.1 Loading The Laundry 5.2 Using Detergent And Additives Turn the water tap on. Please read “Detergents Type Connect the main plug to the main and Quantity of Detergent”on socket. page 26 before use. Press the On/Off button to turn on the Detergent Dispenser Drawer Wahser-Dryer.
When you use the liquid − Close the drawer gently. detergent NOTE − Do not use gelatinous or thick liquid detergents. The softener amount used must not − exceed the “MAX” mark in the Do not put more liquid than the drawer.
5.4 Starting A Cycle ( 5.7 Changing The Options To start a program, press the Start/Pause It may be possible to change some of the touchpad. The corresponding pilot light options after a program has started. will stop flashing and a default program Press the touchpad Start/Pause.
5.9 At The End Of The Program To drain the water: Press the “Start/Pause ” touchpad. − The appliance stops automatically. The appliance drains the water and − The acoustic signal will operate. spins with the maximum spin speed −...
DAILY USE - DRYING (Only) Press the On/Off button to turn on the At the end of the program : machine. The acoustic signal will operate. The water tap must be open The display will show “ ” and and the drain hose must be “Anti Crease ( )”...
At the end of the program press the When “Iron Dry ” option is selected, On/Off button to switch the machine off. the display time will be adjusted after approximately 15 minutes from the At the end of each drying cycle,...
WASHING HINTS 8.1 Sorting The Laundry Wash bras, pantyhose and other delicates in a Follow the wash code symbols on each mesh laundry bag, garment label and the manufacturer’s which you can purchase washing instructions. Sort the laundry as from your supermarket. follows: whites, coloureds, synthetics, delicates, woollens.
Oil based paint: moisten with benzine Low sudsing detergents designed for stain remover, lay the garment on a soft front load washing machines are labelled cloth and dab the stain; treat several “Front Loading”, “high efficiency”, “HE”, times. such as Cold Power for Front Loaders or “Matic”.
Use less detergent if: Not enough detergent causes: the washload to turn grey, you are washing a small load, greasy clothes. the laundry is lightly soiled, large amounts of foam during washing. Too much detergent causes: oversudsing, reduced washing effect, inadequate rinsing.
9.5 Additional Drying If the laundry is still damp at the end of the drying program, select a short drying cycle again. WARNING! Do not over dry the laundry in order to avoid creasing of fabrics or garments shrinking.
CARE AND CLEANING 11.5 Cleaning The Dispenser WARNING! Drawer You must DISCONNECT the appliance from the electricity supply, before you can The washing powder and additive carry out any cleaning or maintenance dispenser drawer should be cleaned work. regularly. Remove the drawer by pressing the 11.1 External Cleaning catch downwards and by pulling it out.
Flush it out under a tap to remove any WARNING! traces of accumulated powder. 1. Disconnect the mains plug from the mains socket. 2. Do not remove the filter while the appliance is operating. Do not clean the drain pump if the water in the appliance is hot.
Page 31
3. When the container is full of water, 5. Remove fluff and objects from the put the drainage duct back again and pump (if there are any). empty the container. Do step 2, 3 again and again until no more water flows out from the drain pump.
Clean the filter in the inlet hose with Put the filter back into the housing a stiff brush. with exposed section facing up. Make sure that you correctly tighten the filter to prevent leakages. Guide Remove the inlet hose behind the appliance.
11.9 Frost Precautions If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Emergency Drain Disconnect the main plug from the main socket.
12. TROUBLESHOOTING 12.1 Possible Failures Certain problems are due to lack of Alarm Code: simple maintenance or oversights, The appliance does not fill with water which can be solved easily without properly. calling out an engineer. Before contacting your local The appliance does not drain the water.
Page 35
Malfunction Possible cause Solution The drain hose is squashed or Check the drain hose kinked. (Error code: connection. The drain pump is clogged. Clean the drain filter. Machine (Error code: does not empty and/or The option “Rinse Hold” Press Start/Pause does not has been selected.
Page 36
Malfunction Possible cause Solution The laundry is not evenly Pause the machine and distributed in the drum. redistribute laundry manually. Machine vibrates or is There is very little laundry in the Load more laundry. noisy: drum. Unstable floors eg. wooden floors.
Page 37
Malfunction Possible cause Solution The “Time Dry” or the “Dryness Select the drying time or Level” degree has not been the dryness level degree. selected. The water tap is not turned on. Open the water tap. (Error code: Machine does not dry The drain filter is clogged.
12.2 Emergency Door Opening In case of power failure or appliance failure, the appliance door remains locked. The wash program continues when power is restored. If the door remains locked in case of failure, it is possible to open it using the emergency unlock feature.
TECHNICAL DATA Dimensions (Height / Width / Depth) 85 X 60 X 65.9 cm Power supply (Voltage / Frequency) 220-240 V~ / 50 Hz Total power absorbed Wash: 2100 W / Dry: 1500 W Minimum fuse protection 10 A Water supply pressure (Maximum / Minimum) 0.8 MPa / 0.05 MPa Washing Drying...
Page 40
Remove the carton box. Remove the Put one of the polystyrene packaging polystyrene packaging materials. elements on the floor behind the appliance. Carefully put down the Remove the plastic bag which cover appliance with the rear side on it.
Remove the three transit bolts. 9. Pull out the plastic spacers. 14.2 Positioning It is important that your Wahser-Dryer stands firm and leveled on the floor to ensure correct operation. The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to avoid restricting the Wahser-Dryer door.
14.3 Water Inlet Loosen or tighten the feet to adjust the level. A correct adjustment of the Connect the water inlet hose to a tap appliance level prevents vibration, noise with 3/4” BSP thread. and the movement of the appliance when in operation.
Page 43
In a sink, drain pipe branch. Fitting Hose Guide This branch must be above the trap so that the bend is at least 60 cm above Pull apart to the ground. Hose bend insert hose. Guide hose Max. 90 cm pull hose Min.
14.5 Electrical Connection The manufacturer declines any responsibility for damage or This machine is designed to operate on injury through failure to comply a 220-240 V, single-phase, 50 Hz supply. with the above safety precaution. “An incorrect power supply may void Should the appliance power your warranty.”...