Technical Data; Special Safety Instructions - Max 66716 Instruction Manual

CORDLESS DRILL
Introduction
To get the most out of your new cordless
drill, please read through these instructions
before use. Please also save the instructions
in case you need to refer to them at a later
date.

Technical data

Battery:
Charging time:
Speed:
Torque:
Torque settings:
Chuck:
With LED work light, charger and 79 assorted
accessories:
2 batteries
1 charger (direct)
10 metal drill bits, HSS 3-10 mm
10 wood drill bits, 3-10 mm
2 � at drill bits, 13 and 16 mm
33 assorted bits, PH, PZ, Torx and Unbrako
9 4-12 mm sockets
9 5/32"-15/32" sockets
1 T-handle
1 soft-grip handle for bits
1 bit adapter
Sound pressure, L : 87.6 dB(A), K
pA
Sound level, L Sound level, L Sound level, L :
WA WA
Vibration, drilling:
24
20 V 1.3 AH Li-ion
3-5 hours
0-650 rpm
Max. 25 Nm
18+1
10 mm
: 5 dB(A)
pA
98.6 dB(A), K : 5 dB(A)
WA
1.298 m/s , K: 1.5 m/s
2
The table below shows how long you
may be exposed to vibration every day, if
the vibration load of 2.5 m/s
exceeded:
Vibration
2.5 m/s
2
3.5 m/s
2
5 m/s
2
7 m/s
2
10 m/s
2

Special safety instructions

Use the charger at room temperature only
(max. 40° C).
Never use the charger if the battery, charger
or cord is damaged.
Check that the air vents on the cordless drill
are not blocked.
Do not use damaged or worn drill and screw
bits and always select the correct type of bit
for the job.
Secure small items in a vice or similar. Never
hold the item in your hand!
Check for concealed power cables, pipes, etc.
in the items or surfaces you are going to drill.
Place a piece of scrap wood under the item
if possible. Make sure that the drill does not
damage any objects under or behind the
item, e.g. when drilling into walls.
The drill must not be in contact with
anything when it is started.
2
Drilling certain materials can produce
harmful dust. Always wear a mask.
Ensure the drill has completely stopped
before changing direction.
is not to be
2
Max. exposure
8 hours
4 hours
2 hours
1 hour
30 minutes