Preface - Siemens SIMATIC PN Installation And Operating Manual

Preface

Purpose of manual
This manual provides you with all the information you need to configure, assemble, connect
and commission the PN/PN coupler.
Basic knowledge required
The following knowledge is required in order to understand the manual:
● general knowledge in the area of automation technology
● You will also need to know how to use computers or PC-like equipment (such as
● Knowledge of working with
Scope of manual
The manual applies to the PN/PN coupler V3.0 with order number 6ES7158-3AD01-0XA0.
This manual contains a description of the components which were valid at the time the
manual was published. We reserve the right to include product information with information
updates for new components and components with a new product status.
Changes compared to the previous version
The following changes have been made in relation to the previous version of this manual,
edition 03/2009:
● Virtual module for dataset transfer.
● Doubling of the quantity framework in relation to the previous level, 1024 bytes of inputs
● Support for the shared device function
● Support for the media redundancy function
Approvals
see appendix General technical data (Page 81)
CE mark
see appendix General technical data (Page 81)
PN/PN coupler
Installation and Operating Manual, 06/2010, A5E00717043-04
programming devices) under Windows operating systems.
STEP 7 V5.4 (http://support.automation.siemens.com/WW/view/en/18652056) manual.
– Introduction of the module type Storage to identify the module used so far RD READ
and RD WRITE
– Introduction to the module type Publisher
and outputs in sum
STEP 7
. This is gained from the Programming with
3