Page 1
105365 SERVER WITH SLIDING DOOR ASSEMBLY INSTRUCTIONS COASTER FINE FURNITURE www.coastercompany.com REVISION 0 : 10/16/2014 REVISION 1 : 12/01/2014 PAGE 1 OF 5...
Page 2
105365 ASSEMBLY INSTRUCTIONS ITEM : ASSEMBLY TIPS : 1. Remove hardware from plastic bag and sort by size. 2. Please check to see that all hardware and part are present prior to start of assembly. 3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
Page 3
105365 ASSEMBLY INSTRUCTIONS ITEM : STEP 1 Place server (A) upside down on soft surface. Unscrew the L-bracket from the back of door (which is used to secure the door in place) using Allen wrench (1) . Anti-Tipping Kit is stapled at the back panel.
Page 4
105365 ASSEMBLY INSTRUCTIONS ITEM : STEP 3 Flip over the server using two people to lift and flip. Align and fasten pull (5) to the doors using screw (6) and fully tighten with Phillips head screw driver (Not provided). STEP 4 4.1.
Page 5
ANTI - TIPPING KIT PARTS IDENTIFICATION: HARDWARE IDENTIFICATION: SERVER SHORT SCREW LONG SCREW CABLE TIE L BRACKET 2PCS STEP 2 This tip restraint must be attached to a wall Locate the other bracket on the wall over a wall stud and two stud using long screw enclosed.
Need help?
Do you have a question about the 105365 and is the answer not in the manual?
Questions and answers