IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0333 777 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is
found to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this lea et and then follow the simple step-by-step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep ttings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of two persons are required to assemble this product.
• Always ensure intended wall area to be drilled is free from any hidden electrical wires, water and gas pipes.
• Not suitable for use in bathrooms.
PRODUCT INFORMATION
• Made from metal, glass and plastic.
• Made in China.
CARE INSTRUCTIONS
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Product must be assembled on a at, level surface.
• Clean using a glass cleaner and soft cloth. Do not use cleaning products containing abrasives as these will scratch
hat stand.
• Do not place very hot or very cold items against or in close proximity to glass surface unless adequately thick
insulation material is used to prevent such items from coming into contact with glass.
• Any spills should be removed immediately with a soft clean lint-free cloth or micro bre cloth and dried
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent
scratching or damage. Ensure the mats and coasters used do not have an abrasive surface underneath.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Not suitable for use in bathrooms.
• Do not strike the glass with hard or pointed items.
• All assembly xings should always be tightened properly and periodically check all xings and tighten if necessary.
GLASS INFORMATION
• This item contains glass. Please handle with extreme care.
• This product contains toughened glass of a nominal thickness of 5 mm conforming to class A of BS 6206:1981
AMD 8693:1995
• If a glass component is chipped or broken replace with glass of the type described on this label. Consult the
Manufacturer, Retailer or Agent with regard to obtaining a manufacturing specification and shape for replacement
glass quoting the model number and batch number or date of manufacture.
WARNING
845525 GENOA WALL FIREPLACE
ASSEMBLY INSTRUCTIONS.
Page 1 of 6
Need help?
Do you have a question about the GENOA 845525 and is the answer not in the manual?
Questions and answers