D-Sub Pin Distribution - AOC TV1764W-2E Series Service Manual

This procedure gives you instructions for installing and using the LCD TV display.
1. Position the display on the desired operation and plug the power cord into a convenient AC
outlet. Three-wire power cord must be shielded and is provided as a safety precaution as it
connects the chassis and cabinet to the electrical conduct ground. If the AC outlet in your
location does not have provisions for the grounded type plug, the installer should attach the
proper adapter to ensure a safe ground potential.
2. Connect the 15-pin color display shielded signal cable to your signal system device and lock
both screws on the connector to ensure firm grounding. The connector information is as
follow:
PIN NO.
1.
2.
3.
4.
5.
6.
7.
8.
3. S-Video ( Y /C ):
SCART:
TV:
AV:
Audio:
PC Input audio:
Audio Input for AV, S-Video, SCART
Headphone
Audio line Out ( to another speaker )
4. Apply power to the display by turning the power switch to the "ON" position and allow about
ten seconds for Panel warm-up. The Power-On indicator lights "GREEN" when the display is
on.
5. With proper signals feed to the display, a pattern or data should appear on the screen,
adjust the brightness and contrast to the most pleasing display, or press auto-adjust to get
the best picture-quality.
6. This TV (with PC function) has power saving function following the VESA DPMS. Be sure to
connect the signal cable to the PC.
7. If your TV requires service, it must be returned with the power cord.

3. D-SUB PIN DISTRIBUTION

1
6
11
15 - Pin Color Display Signal Cable
DESCRIPTION
RED Video
GREEN Video
BLUE Video
Not Used
Ground
Ground-R
Ground-G
Ground-B
TV rear side
TV rear side
TV rear side
TV rear side
TV rear side
3.5mm Stereo female
3.5mm female
5
10
15
PIN NO.
9.
10.
11.
12.
13.
14.
15.
: 4 pin Mini-DIN female
: SCART female(Red/Green/Blue)
: IEC type female
: RCA female (Yellow )
: RCA female (Red / White )
: RCA female ( Red / White )
: RCA female ( Red / White )
13
TV1764W-2E
DESCRIPTION
No Pin
Sync Ground
Not Used
Serial Data for DDC
HORIZ. SYNC
VERT. SYNC
Serial Clock for DDC