Advertisement
Quick Links
Gladiator Action Dolly
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
2 x 16" Pneumatic Tires
2 x Pull-out wheel ball pin
Square extension
Seat Arm
Seat riser
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
A s s e m b l y M a n u a l
Seat
2 x Side Boards
Knob
(3mm,4mm)Allen key
& 10, 2 x 13 Spanner
All rights reserved.
statutes or in writing by the Publisher.
(DL-GDTR-01)
Left/Right Main Section
Flour Board
Upper wide Board
Speed Rail
1
Back sport seat
Wide round extension
Advertisement
Related Manuals for PROAIM Gladiator Action Dolly
Summary of Contents for PROAIM Gladiator Action Dolly
- Page 1 Gladiator Action Dolly (DL-GDTR-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
- Page 2 Action Dolly Setup • Remove the pull-out wheel ball pin attached to the Pneumatic Tires with the help of your hand. • Attach the pneumatic wheels with the Right/ Left main section and insert the pull-out wheel ball pin. • Then secure it properly with the pull-out wheel ball pin.
- Page 3 • Then, loosen the knob on the right/left of the main section. • Insert the wide round extension on the center part of the main section and tighten it properly with the help of a knob. • Then attach the wide round extension on the top part of the section by following the same procedure •...
- Page 4 • Place both the side boards on top of the main section • Attach the floorboard by sliding it on the bottom part of the section. • Now, Attach the floorboard to the center part following the same process • Loosen the Provide knob in the main section.
- Page 5 • Finally, the seat riser or seat arm is properly attached to the dolly. • Remove the bolt in the seat arm with the help of a spanner and 4mm Allen key. • Insert the seat into the seat arm and secure the seat properly with the help of its knob.
- Page 6 • Insert the square extension by sliding it into the speed rail and secure it with the extension knob by setting the position. • Attach the back support seat to the square ex- tension and tighten both the bolts of the back support seat with a 4mm Allen key.
- Page 7 • To narrow the size of the dolly, remove the floorboard. • Try using the push-pin button of the wide round extension, which will convert the size of the dolly to a slightly narrower size. • After collapsing the round extension, slide the floor board and insert it, as shown in the im- age.
- Page 8 YOUR PROAIM GLADIATOR ACTION DOLLY ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.