Intermec 6642 Manual

Intermec 6642 Manual

Expansion battery charger
Hide thumbs Also See for 6642:

Advertisement

Charger Specifications

AC Adapter Power
(18V 1.5A)
LEDs
Power, Charge
Power Consumption
27W
Operating
41 to 95 F (5–35C)
Temperature
Storage Temperature
-4 to 140 F
(-20–60C)
Dimensions
5.9" x 10.86"x 2.12"
(150 x 276 x 54mm)
Weight
2 lbs (917g) AC
Adapter and Charge
Unit
Battery Operating
Battery Charge Time
Time
Approximately 3–5
Approximately 2.5 to 4
hours
hours
Spent batteries MUST be recycled.
Contact local authorities for a nearby battery recycling program.
Intermec is a trademark of Intermec Technologies Corporation.
Copyright 2000 Intermec Technologies Corporation. All rights reserved.
P/N 962-000-012 Revision A

Packing List

Guide
P/N: 962–000–012
AC Adapter/Charger
P/N: 871–006–030
Charger Unit
P/N: 871–008–060
AC Power Cable
P/N: 871–006–050
" NOTE:
This Battery Charger permits external charging of two
Intermec–labeled Lithium–Ion Battery Packs, P/N
317–106–001, rated 11.1 V 3600 mAH only.

Charger Indicator LEDs

Power
Green
Orange
Flashing (80%)
Charge
Steady (90%)
Green (Fully Charged)
Error Condition
Red

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6642 and is the answer not in the manual?

Questions and answers

Summary of Contents for Intermec 6642

  • Page 1 Approximately 2.5 to 4 hours hours Spent batteries MUST be recycled. Contact local authorities for a nearby battery recycling program. Intermec is a trademark of Intermec Technologies Corporation. Copyright 2000 Intermec Technologies Corporation. All rights reserved. P/N 962-000-012 Revision A Packing List Guide P/N: 962–000–012...
  • Page 2 Setup–Connecting the AC Adapter/Charger to the Charge Unit 1. Unpack the unit and follow the steps outlined below. Battery Insertion 1. Set the battery lock to the unlocked position on the expansion battery before inserting it into the charger. 2. Open the battery connector cover on the charging slot. 3.

Table of Contents