Nightscope; Backlight Compensation; Spot Exposure Control - JVC GZ-MG67AA Instructions Manual

Hard disk camcoder
Hide thumbs Also See for GZ-MG67AA:
Table of Contents

Advertisement

Nightscope

The shutter speed is automatically adjusted
from 1/2 to 1/15 seconds. It enables recording
with little light in dim locations.
After performing "To change to manual
recording mode" (
The
To cancel nightscope
Press
(NIGHT) so that the
disappears.
NOTE:
It is recommended to use the tripod (
when recording with a slow shutter speed.

Backlight Compensation

Backlight compensation brightens the subject
quickly. With a simple operation, dark portions
of the subject are brightened by increasing the
exposure.
After performing "To change to manual
recording mode" (
To cancel backlight compensation
Press
(
) twice so that the
disappears.
pg. 24)
16:9
indicator appears.
indicator
pg. 16)
pg. 24)
16:9
The
indicator appears.
indicator

Spot Exposure Control

Selection of a spot metering area enables more
precise exposure compensation. You can select
one of the three metering areas.
After performing "To change to manual
recording mode" (
1
Press twice.
The
2
Select the desired spot metering area
frame.
Select
Set
To lock the exposure
After you finish configuring the setting, press
and hold 49 for more than 2 seconds. The
indicator appears.
To cancel spot exposure control
Press
(
) once so that the
disappears.
pg. 24)
16:9
indicator appears.
16:9
[0h56m]
indicator
27
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gz-mg67agGz-mg67ahGz-mg77aaGz-mg77agGz-mg77ahGz-mg77as

Table of Contents