Automatic Fault Warnings And What To Do - Sharp KD-NCB7S7PW9-CZ User Manual

PROBLEM
Clothes have shrunk, felted or
deteriorated.
Water leaking from the loading door.
The loading door opens on its own.
The water tank warning symbol is
on/flashing.
The filter cleaning warning symbol
is on.
The condenser cleaning warning
symbol is on.
The program can not be started and
the filter warning led is blinking
The program can not be started and
filter warning led is blinking
The program can not be started and
condenser warning led is blinking
The program can not be started and
both condenser and filter warning
leds are blinking

9. AUTOMATIC FAULT WARNINGS AND WHAT TO DO

Your tumble dryer is equipped with a built-in fault detection system, indicated by a
combination of flashing operation lights. The most common failure codes are shown below.
ERROR CODE
E03 /
E04
E05
E06
E08
REASON
The programme used might not be
suitable for the type of laundry.
There might be lint accumulated on
the inner surfaces of the loading
door and on the surfaces of the
gasket of the loading door.
The loading door might not be
closed properly.
The water tank might be full.
The water discharge hose might
be bent.
The lint filter might be unclean.
The filter seat might be clogged
by lint.
There might be a layer that causes
obstruction on the surface of the
lint filter.
The condenser might be unclean.
The filter may not be placed
The filter warning led is blinking
even though the filter is placed
The filter may not be placed
The condenser may not be placed
The condenser and filter may not
be placed
The filter and condenser warning
leds are blinking even though the
filter and condenser are placed
SOLUTION
Empty the water tank, if problem does not solved, contact
the nearest authorised service agent.
Contact the nearest authorised service agent.
Contact the nearest authorised service agent.
Contact the nearest authorised service agent.
There may be voltage fluctuation in mains. W ait until
voltage is appropriate for working range.
EN - 24
SOLUTION
Check the care labels on the
laundry items, select a suitable
programme for the type of laundry.
Clean the inner surfaces of the
loading door and the surfaces of the
gasket of the loading door.
Push the loading door until you hear
the closing sound.
Empty the water tank.
If the product is connected directly
to the water outlet, check the water
discharge hose.
Clean the filter.
Clean the filter seat.
Wash the filter with lukewarm water.
Clean the condenser.
Replace the filter
Call technical service
Call technical service
Replace the condenser
Replace the filter
Call technical service