FoodSaver V4400 Series Quick Start Manual
Hide thumbs Also See for V4400 Series:

Advertisement

Available languages

Available languages

V4400 SERIES QUICK START GUIDE
MAKE A FOODSAVER
1. Open Appliance Door
and place roll into Roll
Holder. For best results,
insert roll with material
flap down.
2. Lift up Roll Cutter Bar
and place bag material
beneath the Cutter Bar.
3. Pull out enough bag
material to hold item
being vacuum sealed,
plus 3 inches (7.62 cm).
Lower the Roll Cutter
Bar and slide Bag Cutter
across the Cutter Bar.
4. Press Seal Button. Red
Seal Indicator Light will
illuminate.
5. Using two hands, slowly
insert open end of
bag, curled down, into
Vacuum Channel until
clamp motor starts.
6. When Red Seal Indicator
Light turns off, sealing is complete. You may remove
bag from the Vacuum Channel.
VACUUM SEAL FOODSAVER
ZIPPER BAGS:
(available in select models)
1. Prepare Zipper Bags
according to FoodSaver
Accessory Guidelines,
which are included with
accessory purchases.
For Zipper Bags, make
sure not to put any food
under the valve and press
zipper closed with finger while bag is lying down on a
flat surface.
2. Place end of Retractable Handheld Sealer over
Container valve.
3. Press Accessory Button to vacuum. To release vacuum
and open, turn knob on Lid to Open.
Zipper bags are safe for pantry and fridge use only.
p. 1
V4400_22EFSQSG1 (digital).indd 1
V4400_22EFSQSG1 (digital).indd 1
HOW TO:
BAG:
®
Insert Bag curl downward
®
®
VACUUM SEAL A FOODSAVER
1. Place item(s) in bag,
allowing at least 3 inches
(7.62 cm) of space between
bag contents and top
of bag. The extra space
is required to allow the
bag to seal tightly around
contents.
2. Your new FoodSaver
®
System automatically
vacuums and seals. To
Vacuum: DO NOT PRESS
THE SEAL BUTTON.
Using two hands, slowly
insert open end of bag,
curled down, into Vacuum
Channel.
3. Continue to hold bag until
Vacuum Pump starts. You
may now release bag. The Vacuum Progress Lights will
illuminate.
4. When Red Seal Indicator Light turns off, remove bag.
Refrigerate, freeze or store as needed.
VACUUM SEAL FOODSAVER
CONTAINERS:
(sold separately)
1. Prepare FoodSaver
®
Preserve & Marinate
Container according to
Guidelines, which are
included with container
purchase.
2. Place end of Retractable
Handheld Sealer over
Container valve.
3. Press Accessory Button to vacuum. To release vacuum
and open, turn knob on Lid to Open.
To release vacuum and open, turn knob on lid to Open.
See Owner's Manual for full instructions and safeguards.
Français
Español
p. 2
p. 3
BAG:
®
Insert Bag curl downward
®
2022/4/4 上午11:08
2022/4/4 上午11:08

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V4400 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for FoodSaver V4400 Series

  • Page 1 Français Español V4400 SERIES QUICK START GUIDE p. 2 p. 3 HOW TO: MAKE A FOODSAVER BAG: VACUUM SEAL A FOODSAVER BAG: ® ® 1. Open Appliance Door 1. Place item(s) in bag, and place roll into Roll allowing at least 3 inches Holder.
  • Page 2 English Español GUIDE DE DÉMARRAGE RAPIDE SERIES V4400 p. 1 p. 3 COMMENT… FAIRE UN SAC FOODSAVER METTRE UN SAC FOODSAVER SOUS VIDE : 1. Ouvrir la porte de l’appareil et placer 1. Placer le ou les articles le rouleau dans le dans le sac en laissant un compartiment.
  • Page 3 English Français GUÍA DE INICIO RÁPIDO DE LA SERIE V4400 p. 1 p. 2 CÓMO HACER UNA BOLSA FOODSAVER SELLAR AL VACÍO UNA BOLSA ® FOODSAVER ® 1. Abra la puerta del aparato y coloque el 1. Coloque el/los artículo(s) rollo en el portarrollos.

Table of Contents