Display Features; Command Line Switches - Agilent Technologies Acqiris DP105 User Manual

row, the first column contains the difference t
average value of the t in the left column and the standard deviation of the t
n
The "Show Parameters" option activates a display of pulse parameters for each active channel. Inactive channels will
have parameter values of 0.0. The parameters will be calculated in a model in which the distribution of measured
voltages has two distinct peaks. If this condition is not satisfied the results will be unreliable.

4.11. Display Features

Display features in the Options menu include items for
•
turning the waveform display off (by de-selecting "Display Waveforms"),
•
overlaying segments of a sequence,
•
connecting displayed data points,
•
modifying the display refresh rate,
•
displaying the internal temperature of the currently selected module

4.12. Command Line Switches

When starting the AcqirisLive application, the executable's name in the command line can be followed by one or
more switches to change the running conditions.
Syntax
The syntax of the command line is the following:
path\AcqirisLive.exe options
where options are chosen from the following list
[-a][-b][-B][-c][-d][-h][-i][-l][-m][-n][-p][-s][t][-v][-x]
Available Switches
List of available switches:
-a start in Averager mode
-b Buffer size for large waveforms
-B Number of banks for SAR mode
-c no initial calibration
-d use DMA for data transfers (default)
-h high priority process (default)
-i use acquisition interrupts
-l low priority process
-m medium priority process
-n no DMA for data transfers
-p Use acquisition polling
-r start in Transient Recorder (digitizer) mode
-s simulation mode
-t temperature update off
-v show acquisition state
-x disable automatic multi-instruments
Operation Mode
User Manual: Agilent Acqiris 8-bit Digitizers
and the second column contains t
– t
n n-1
. The top line contains the
n
in the right one. The times are in ps.
n
Page 43 of 59