Shelves; Drawers - Cardinal Health CAX1230FA Installation & Operation Manual

7.3 Shelves

Single door laboratory freezers come standard with 4 shelves and double door laboratory freezers come standard with
8 shelves.
Maximum shelf capacity is 45 kg (100 lbs).
For safety in shipping, the shelves are packaged and secured inside the cabinet. Insert the shelf support hangers
(included inside the unit) into the built-in shelf supports (located on the inside walls of the cabinet interior) at the
desired locations. Position the shelves on the flat supports (refer to Figure 1). Do not position shelving to disrupt the
thermal bottle(s).
Figure 1. Shelf Support Hanger

7.4 Drawers

Single door laboratory freezers have the option to be ordered with 7 drawers and double door laboratory freezers have
the option to be ordered with 14 drawers.
Drawers are shipped in a factory installed position that promotes uniform spacing between the drawers. The drawer
slides are adjustable to higher and lower positions in the cabinet. You can position these slides in the vertical slots
which are spaced at one-inch intervals. The drawers must be removed in order to adjust the position of the drawer slides.
For CH1230, CH2330 and CH5030, the maximum drawer capacity is 27 kg (60 lbs). For CH3030, the maximum drawer
capacity is 36 kg (80 lbs).
CAUTION: Risk of Abrasion. Hidden sharp edges may be present on drawers. Use appropriate Personal Protective
Equipment (such as gloves) while handling the drawers to avoid possible sharp points related injury.
7.4.1 Removing the Drawers
To remove the drawers, complete the following steps (refer to Figure 2):
1. Pull the drawer towards you until the slides are fully extended.
2. Lift the back of the drawer to disengage the mounting tabs from the slots on the slides.
Note The drawers fit snugly between the slides. Push the back of the drawer from underneath to remove the drawer.
9