Advertisement
Quick Links
Advertisement
Summary of Contents for West Marine SeaVolt Jumpstart
- Page 1 ® WATERTIGHT Jumpstart Kit • 18 amp/hr Sealed Lead-acid Battery LED Level Indicator • Rechargeable LED Charging Indicator • 12 Volt Power Port • Convenient Worklight • Corrosion Resistant • Maintenance Free • Waterproof Model 3742152 FULLY CHARGE BEFORE FIRST USE!
-
Page 2: What Is Covered
Be Sure To Fully Charge Before First Use! West Marine Limited Warranty WHAT IS COVERED: Any defect in material and workmanship FOR HOW LONG: 1 Year Unconditional / 3 Year Pro-rate LIMITATIONS: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the product is fit for ordinary use), are limited to 1 year from the date of purchase. -
Page 3: Important Warnings
THANK YOU FOR CHOOSING WEST MARINE SEAVOLT Your West Marine SeaVolt Watertight Jumpstart Kit has been carefully designed and manufactured to give you years of dependable operation. This manual contains all the information you will need to operate your Watertight Jumpstart Kit at optimum efficiency. - Page 4 CONTENTS: 1. Charging Cords Storage Pouch 2. ON/OFF Switch 3. Charging Port 4. Charging Indicator LED 5. Battery Level Button 6. 12V DC Power Cord 7. DC Charging Cord 8. 12 Volt Power Port 9. Battery Level Indicator LED 10. Worklight 11.
- Page 5 INSTRUCTIONS FOR USE: Recharging The Battery Your Watertight Jumpstart Kit comes complete with a built-in lead acid battery. Fully charge before first use. To Recharge Using The 120V AC Power Cord: Plug one end of the AC charging cord into the Charging Port of the Jumpstart System.
- Page 6 Jumpstarting An Engine If your craft’s battery is too weak to start your motor, you can use the unit’s booster clamps to start it. Before doing so, remember to switch off all the craft’s accessories such as lights, AC, radio, etc. To obtain maximum power, ensure there are no 12 volt accessories connected to the unit and that the worklight is disconnected.
-
Page 7: Troubleshooting Tips
TROUBLE SHOOTING TIPS: Battery Indicator LEDs Not Lighting Up During Recharging? Make sure the power cord is securely connected to the AC/DC input. Unit Failing To Jumpstart Your Craft? Make sure the unit is fully charged before using. Make sure the booster clips are securely connected. SPECIFICATIONS: Battery: Sealed lead-acid... - Page 8 500 Westridge Drive, Watsonville, CA For further information about this or other quality West Marine SeaVolt products, log on to our website www.westmarine.com or call our Customer Service Department at 1-800 BOATING.