Advertisement
Fastening the wire:
2 options are available, see also item 4.
Remove the plate on the drum. Insert the wire as
3
shown and fasten it to the bolt using an appropriate
eye at end of the wire. You may secure the bolt by
adding Loctite or similar to the thread.
Remount the plate and you are now ready for
spooling the wire onto the drum.
You can also fasten the wire on the outer side of
4
the drum.
Loosen the brake at the left side and spool the wire
5
taking precaution as per item 6.
30.000 – Portable Winch - Manual
3
Advertisement
