Maintenance; Descripción De Elementos - Baños 10 PRISMA User Manual

8. MAINTENANCE

The most likely origin of the wrong operation of the mixer is due to the
accumulation of dirtiness in the the filter of the thermostatic cartridge (lime
incrustations, grave, etc.)
The dirt can bung the thermostatic cartridge up, and can soil the thermostatic
mixer. If the filters are dirty, you can clean them with a solution of water and
vinegar (suggested).
Steps to accede to the thermostatic cartridge:
1.- Close the central stopcocks to avoid any water leak.
2.- Remove the handle.
3.- Using a proper tool, remove the thermostatic cartridge, and clean them.
4.- Put again the thermostatic cartridge in the initial location.
5.- Finally, insert the handle.
ADVISE: The thermostatic cartridge is a very fragile piece; handle it with care.
CLEANING: The cleaning of the column will be realized with a neutral soap
product and a smooth sponge, do not use abrasive and acid products.
(check indications from the supplier).
For the shawerscreen use always special products for glass.
Handle
Filters
Thermostatic cartridge Thermostatic mixer
2. DESCRIPCIÓN DE ELEMENTOS
Esquema 1.
Panel digital
Jets cervicales
Jets gemelos
IMPORTANTE:
Lea con atención la totalidad de este manual antes de usar el producto, y
consulte con su médico la posibilidad de utilizar la sauna y el hidromasaje.
Ducha fija
Ducha flexible
Mandos grifería
Hidro vertical
Jets dorsales
Salida de
vapor