Overview: Validation & Self-Test
This guide will help to validate the performance of
your TWS prototype.
• Part 1: Hardware Check. Using BIST to check
integrity of VA1210 MEMS & wire connections
• Part 2: Wearing the TWS . Wear the TWS
properly to ensure the best signal.
• Part 3: Signal Quality Check. Measuring SNR
and Noise Floor.
• Part 4: Setting Up Hardware VAD . Using the
VA1210 as an ultra-low-power Hardware VAD.
3
Vesper - Confidential
Hardware Check
Wearing the TWS
Signal Quality Check
Setting Up Hardware VAD
Validated TWS prototype