Advertisement
Installation Notes
① Insert the phone or tablet, move
the clamp to the bottom of the chute
③ The magnets should be aligned
on the same side
⑤ Install the back shading plate via
magnets on the top & side plates
② Install the top & side shading
plates through sliding into the chutes
④ Install the reflector and fix it on
the side chute
⑥ Install the phone/tablet holder
to the lower slot
For Camera
① Install the lens ring to the camera
accordingly
③ Flannel lens adapter r ing is
suitable for all lens sizes (optional)
② When using camera to shoot,
install the lens ring onto the chute
④ Done
Advertisement
