Table of Contents
Advertisement
PROBLEM
Burners will not
light using the
ignition system
Burner will not light
with a match
Low flame or
flashback (fire in
burner tube-a
hissing or roaring
noise may be heard)
TECHNICAL INFORMATION
TROUBLESHOOTING
POSSIBLE CAUSE
1. LP gas cylinder is empty
2. Faulty regulator
3. Obstruction in burner
4. Obstructions in gas jets or gas hose
5. electrode wire loose or disconnected
on electrode or ignition unit
6. Electrode or wire is damaged, faulty
pushbutton igniter
1. LP gas cylinder is empty
2. Faulty regulator
3. Obstructions in burner
4. Obstructions in gas jets or gas hose
1. LP gas cylinder too small
2. Obstructions in burner
3. Obstructions in gas jets or gas hose
4. Windy conditions
2. Have regulator checked or replace
2. Have regulator checked or replace
4. Use BBQ in a more sheltered position
13
SOLUTION
1. Replace with full cylinder
3. Clean burner
4. Clean jets and gas hose
5. Reconnect wire
6. Change electrode and wire,
change igniter
1. Replace with full cylinder
3. Clean burner
4. Clean jets and gas hose
1. Use larger cylinder
2. Clean burner
3. Clean jets and gas hose
Advertisement
Table of Contents
