Philips FW-C577/21 Service Manual page 8

DISMANTLING INSTRUCTIONS
Dismantling of the Front Control Board and Front Display Board
1) The Knob Volume Rotary (pos 164) can be remove by
pulling it out in the direction as shown in Figure 8.
2) The Knob Game Sound Control (pos 176) can be remove
by pulling it out in the direction as shown in Figure 9.
Figure 8
Figure 9
Figure 10
2-2
3) Loosen 4 screws D (see Figure 11) to remove the Bracket
PCB Front Display (pos 183) and Front Display Board
(pos 1101-A).
4) Loosen 1 screw E (see Figure 12) to remove the IR Eye
Board (pos 1107-H).
5) Loosen 2 screws F (see Figure 12) to remove the ECO
Power Board (pos 1107-E).
6) Loosen 3 screws G (see Figure 12) to remove the
Bracket VU Meter 2 (pos 136) and loosen 2 screws H to
remove the VU Meter Right Board (pos 1107-D) from the
Bracket VU Meter 2.
7) Loosen 3 screws J (see Figure 12) to remove the Bracket
VU Meter 1 (pos 129) and loosen 2 screws K to remove
the VU Meter Left Board (pos 1107-C) from the Bracket
VU Meter 1.
8) Loosen 2 screws L (see Figure 13) to remove the USB PC
LINK Board (pos 1104).
9) Loosen 9 screws M (see Figure 13) and loosen the 2 nuts
(see Figure 10) to remove the Front Control Board (pos
1107-A).
10)Loosen 1 screw N (see Figure 13) to remove the
Headphone Board (pos 1107-B).
Figure 11
Dismantling of the Front Control Board and Front Display Board
11) Loosen 3 screws P (see Figure 14) to remove the Game
Port Board (pos 1107-G).
Figure 12
Figure 13
Figure 14
2-2
12) Loosen 2 screws Q (see Figure 15) to remove the USB
LED Board (pos 1107-F).
Figure 15