Interpreting the Status LEDs for the AnywhereUSB/5
Green hunting pattern across all LEDs
Orange alternating on ports 1-3-5 and
2-4
Solid Green
Green over Red hunting pattern
AnywhereUSB User Manual (90001085_B)
The AnywhereUSB/5 has six LEDs on the front panel: one System Status
LED and five hub LEDs. Each LED is capable of displaying three colors:
red, green, or orange.
System Status LEDs
On initial power up the System Status LED is orange for two seconds
while the system initializes and then blinks green. If DHCP is enabled and
the unit is booting up, the System Status LED will be orange while the
AnywhereUSB searches for a DHCP server. If it cannot find a DHCP
server, it will return to the default configuration to allow the Configuration
Utility to assign a static IP address.
Hub LEDs
Not connected to a host PC.
Updating image in Flash. Do not remove
power from AnywhereUSB while flash is
being updated. Doing so will damage your
AnywhereUSB.
Hub port is powered.
Please call customer service.
13