Deinstalling The Gigaset Usb Stick 108; Deinstalling The Software; Completing Deinstallation - Siemens Gigaset USB Stick 108 Manual

Deinstalling the Gigaset USB Stick 108

You may have to deinstall the Gigaset USB Stick 108:
u
If an error occurred during installation.
u
The Gigaset USB Stick 108 is not working properly and the problem cannot be
rectified (see the chapter "Troubleshooting" on page 44).
u
You have acquired a newer version of the Gigaset USB Stick 108 and the operating
instructions of the new device recommends deinstalling the older version.
u
You no longer need the Gigaset USB Stick 108 and want to free up space on the hard
disk and working memory.
Deinstalling involves the following steps:
1. First deinstall the software for the Gigaset USB Stick 108.
2. Then deinstall the hardware.
3. Complete deinstallation.

Deinstalling the software

To deinstall the software for the Gigaset USB Stick 108 from your PC:
ì
Close all running programs.
ì
Select Start – Programs – Gigaset USB Stick 108 – Gigaset USB Stick 108
Deinstall.
ì
Confirm the security prompt for deinstallation with OK.
The software and all the drivers will now be removed from your PC.
ì
Do not restart your PC until you have also removed the hardware.
Note:
If you restart the PC before removing the Gigaset USB Stick 108, Windows will
automatically start its hardware recognition program. If this happens, close automatic
hardware recognition by clicking on Cancel.

Completing deinstallation

ì
Remove the Gigaset USB Stick 108 from the USB socket of your PC.
ì
Follow the remaining instructions and then restart your PC.
Deinstalling the Gigaset USB Stick 108
35