Table of Contents
Advertisement
Connecting the System Control Box (Hidden Installation)
1. Connect one end of an HDMI cable to the HDMI OUT port of Display 2. Then,
connect the other end of the cable to the HDMI IN port of Display 1.
HDMI IN
NOTE: Route the HDMI cable as shown below:
2. Carefully unfold the System Control Box panel. Ensure the main system control
board is on the right.
NOTE: Use caution as the System Control Box panel is separated into two pieces
with wires attached.
3. Install the left part of System Control Box using the M6x16mm screws behind the
Cabinet.
60
HDMI OUT
Advertisement
Table of Contents
