Jeulin 472 066 Manual page 6

Measurement
Luxmeter sensor
Ref :
472 066
Sensitive area
Of the Sensor
ENGLISH
1 General
The purpose of the sensor is to measure the intensity of light in a medium. It
is totally suitable for experiments on metabolism with the bioreactor, for
example the study of photosynthesis in chlorophyll plants.
Connector for
interface
(Primo, VTT,
Synéo..)
2 Use
2.1 Interfaces
The sensor operates with the VTT
2.2 Connection of the sensor to the VTT
The sensor is connected using the connector located on the rear panel of the
unit :
•
Align the sensor with the selected measuring channel
•
Engage the sensor on the console guide
•
Follow the guiding system of the VTT
•
Push it well home
2.3 Bringing into service with VTT
- Connect the sensor
®
- Switch on the VTT
If the sensor is not recognised, update your VTT console connected to the
PC with the diskette, using the Espace-VTT software :
- Connect the console to your PC
5
®
console (or ESAO PRIMO or SYNEO)
®
console
console
®
console